Installation Guide

ASSEMBLY INSTRUCTIONS

1. Select suitable location that can support the weight

of the fixture. Determine method of mounting before

drilling. Mark two spots on the ceiling 42 in. apart

for the mounting hardware (not included).

2. For Mounting to Drywall

Drill 1/4 in. hole to the ceiling to clear the closed flaps of

the toggle bolt. Make sure to fasten the toggle bolt into

the butterfly nut before inserting the flaps into the ceiling

with the toggle bolt protruding through the ceiling.

Lock the assembly by screwing the hook into the ceiling.

For Mounting to Wood

Drill 1/16 in. diameter pilot hole in the ceiling. Make sure

to fasten the combo wood-machine end into the metal

hook screwing into ceiling to lock and tighten.

3. Install one closed loop of hanging chain (B) to the

metal “T” shaped hook on fixture body (A). Repeat

step on other side of fixture.

4. Hang fixture body (A) by placing one chain set (B)

over each hook that has been installed on the ceiling.

You may need to adjust the chains slightly on the hooks

for fixture to hang level. Fixture must hang at least

3 in. from ceiling.

5. To install lamps (not included), insert pins into slots

and rotate 90° to seat lamps in place. Connect plug to

a standard 120 V grounded outlet.

Lowes.com

42 in.

Drywall

Wood

ROTATE 90