Installation Guide

3
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
WARNING
• For installation in dry or damp residential applications.
• Read all safety precautions and installation instructions carefully before installing or servicing
this fixture. Failure to comply with these instructions could result in potentially fatal electric
shock and/or property damage.
• It is recommended that a qualified electrician perform all wiring. This fixture must be wired
in accordance with all national and local electrical codes. To reduce the risk of electrical shock,
and to assure proper operation, this fixture must be adequately grounded.
CAUTION
• Instant-on 120 volt, 60 Hz electronic ballast with minimum 0°F start.
• Do not handle any energized fixture or attempt to energize any fixture with wet hands or while
standing on a wet or damp surface or in water.
• Disconnect electrical power before installing or servicing any part of this fixture.
• Not for use with dimmer switch of any kind.
PREPARATION
Compare parts with package contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 30 minutes
Tools required for assembly (not included): (2) mounting screws or toggle bolts,
(2) butterfly nuts, (2) metal threaded hooks, drill, 1/4 in. drill bit, 1/16 in. drill bit,
eye protection, ladder, pliers, stud finder.
Helpful tools (not included): Combo wood machine (for wood mounting)
Lowes.com