Dimensions Guide

Treadplate Shoplight
271069
Features
This unit is designed for general purpose task lighting. Features a single
segment reflector, on/off pull switch and hanging chain set.
For Residential use.
Construction
Housing and cover are die formed of 26-gauge cold rolled steel.
Unit comes fully assembled. Suspended mounting only with
included chain. Minimum spacing from ceiling surface
is (3) inches.
Finish
Housing interior is finished in white gloss enamel paint.
Exterior has galvanized tread plate finish.
Diffuser
There is no diffuser on this fixture. The fluorescent lamps are exposed.
Electrical
U.L. listed Normal power factor, electronic, Class P ballasts for
120 volt, 60 hertz A.C. operation. Lamp holders are rotating lock, medium bi-pin type.
5 ft. cord and 3 prong plug included.
Lamping
For use with 2/32 watt T8 linear fluorescent lamps; supplied by others.
Certification
All fixtures are UL listed for damp locations.
Specifications and dimensions
subject to change without notice.
DATE
LOCATION
PREPARED
BY
COMMENTS
CATALOG
NUMBER
QUANTITY
FIXTURE TYPE
L
Model # Qty. Lamp H W L
271069 2 F32T8 2.75” 6.25” 49.5”
Ordering Information:
H
W