Installation Guide

A
1. Remove the mounting bracket (A) from fixture
assembly (C) by loosening strain relief screw and
decorative nut (B).
Remove all zip ties holding the guy wires and power
cord together.
ASSEMBLY INSTRUCTIONS
4
2
3
4
1
A
C
Strain relief
screw
B
2. Hang the hanging strap (CC) on the mounting
bracket (A) and then install the mounting bracket
(A) to the junction box by using junction box
screws (AA).
AA
x 3
Hardware Used
Junction
Box Screws
x 1
Hanging Strap
CC
3. Attach hook on interior of canopy to loop on
hanging strap (CC).
Push the power cord through the threaded nipple
on the mounting bracket (A), then pull the power cord to
the desired length, attach the
strain relief buckle (EE) to
power cord and slide strain relief buckle (EE) toward
mounting braket (A) to secure the power cord in place.
CC
AA
Hardware Used
L
N
BB
Strain Relief Buckle
EE
x 1
EE
CC
A
4. Make electrical connections using wire connectors
(BB). Refer to ELECTRICAL CONNECTIONS on
page 3 for wiring directions.
Secure the fixture assembly (C) to ceiling using the
decorative nut (B) and retighten the strain relief screw.
x 3
Wire Connector
BB
Hardware Used
B
C
Lowes.com