Operating Guide

6
2. DO NOT RUN DRY. Running pump (A) when it
is not submerged in water will damage the seal
and impeller, and void the warranty.
Do not
run dry
2
CARE AND MAINTENANCE
The motor housing of pump (A) is completely sealed and requires no service. Disassembly of the
motor housing or alteration of the power cord voids all warranty.
1. Periodically unplug pump (A) to inspect the inlet
and remove any debris. Make sure your hands
are dry and that you are not standing in water.
Unplug
pump
Remove
debris
1
2. If pump (A) clogs, unplug the pump from the
power supply. Attach one end of a garden
hose to a spigot and the other end to pump
(A) discharge. Turn on the spigot to run water
through pump (A) to clean it out.
2
A
A
A