Operating Guide

CAUTION

To avoid being burned, always hold the work light by

its grip handle (A) when making adjustments.

WARNING

RISK OF FIRE. DO NOT place work light near

flammable or combustible surfaces.

Open the folding stand

1. Hold the light by one hand and pull the folding

stand (D) out. (Fig. 1a)

2. Adjust the lamp head (C) forward. (Fig. 1b)

3. Place the light to standing position. (Fig. 1c)

4. Adjust the lamp head to preferred position. (Fig. 1c)

NOTE: If screw (G) on folding stand (D) becomes

loose due to extensive use, use a Torx 20 head

screwdriver and a wrench (neither included) to tighten.

OPERATING INSTRUCTIONS