Installation Guide

AA
HARDWARE USED
M6×12 Screw
x 5
BB
HARDWARE USED
M5×6 Screw
x 3
Lowes.com
4
AA
ASSEMBLY INSTRUCTIONS
1. Insert 5 M6×12 screws (AA) through the holes in the standing pole (F), then attach the standing
pole to the base (G).
F
F
G
E
BB
F
BB
BB
BB
2. Loosen and remove the 3 M5x6 screws (BB) on the height adjusting base on the upper connecting
pole (E). Place the spring into the standing pole (F). Insert the upper connecting pole (E) into the
standing pole (F), making sure the holes on the height adjusting base and the standing pole (F) are
aligned. Insert the 3 M5x5 screws (BB) into the standing pole (F) and tighten them. Adjust the
height of the upper connecting pole (E) as desired, then secure using the adjusting knob.
E
1
2