Installation Guide

OPERATING INSTRUCTIONS

CARE AND MAINTENANCE

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

ASSEMBLY INSTRUCTIONS

1. Adjust the desired speed by rotating the switch knob

0 Stop 1 Low 2 High

1. Attach the Wheels (B) to the Fan Body (A) and secure with screws (AA).

The fan fails to

operate.

1. Fan may not be plugged in.

1. Make sure the fan is plugged in

and electrical outlet is working

properly.

2.There may some be obstructions

in the fan.

2. Check for any obstruction. If you find

an obstruction, turn the fan“OFF”.

Unplug the fan and carefully remove

the obstruction. Plug the fan in and

turn it on again, referring to the

OPERATING INSTRUCTIONS.

Unplug the appliance before cleaning. Don’t use any water for cleaning metal surfaces.

Slightly moisten a cloth and then wipe off the surfaces of the fan. In order to remove

the dust from the protective screen, use a vacuum cleaner or remove the front protective

screen by removing the securing screw on the edge of the screen with a screwdriver.

After cleaning, remount the safety screen. After doing this, fasten the securing screw on

the edge of the protective screen.

Lowes.com