Installation Guide
4
OPERATING INSTRUCTIONS
CARE AND MAINTENANCE
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
ASSEMBLY INSTRUCTIONS
1. Adjust the desired speed by rotating the switch knob
0 Stop 1 Low 2 High
1. Attach the Wheels (B) to the Fan Body (A) and secure with screws (AA).
The fan fails to
operate.
1. Fan may not be plugged in.
1. Make sure the fan is plugged in
and electrical outlet is working
properly.
2.There may some be obstructions
in the fan.
2. Check for any obstruction. If you find
an obstruction, turn the fan“OFF”.
Unplug the fan and carefully remove
the obstruction. Plug the fan in and
turn it on again, referring to the
OPERATING INSTRUCTIONS.
1
0
2
B
B
A
AA
Unplug the appliance before cleaning.Don’t use any water for cleaning metal surfaces.
In order to remove the dust from the protective screen, use a vacuum cleaner or remove
the front protective screen by removing the securing screw on the ed
with a screwdriver. After cleaning, remount the safety screen. After doing this, fasten the
securing screw on the edge of the protective screen.