Installation Guide

9
WARRANTY
The manufacturer warrants this lighting fixture to be free from defects in materials and
workmanship for a period of five (5) years from the date of original purchase by the consumer.
We will repair or replace (at our option) the unit in the original color, and style if available, or in a
similar color and style if the original item has been discontinued, without charge, exclusive of
bulbs. Defective units must be properly packed and returned to the manufacturer with a letter of
explanation and your original purchase receipt showing date of puchase. Call 1-866-994-4148 to
obtain a Return Authorization number and an address where to ship your defective product.
Note: No C.O.D. shipments will be accepted. The liability of the manufacturer is in any case
limited to replacement of the defective light fixture product. The manufacturer will not be liable
for any other loss, damage, or injury which is caused by the product. This limitation upon the
liability of the manufacturer includes any loss, damage, or injury which is (I) to person or
property or otherwise; (II) incidental or consequential in nature; (III) based upon theories of
warranty, contract, negligence, strict liability,tort, or otherwise; or (IV) directly or indirectly related
to the sale, use, or repair of the product. This warranty gives you specific rights, and you may
also have other rights which vary from state to state.
REPLACEMENT PARTS LIST
In the event that you are missing a part or have questions regarding installation, please call the
customer service department at 1-866-994-4148, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8
a.m. - 5 p.m., EST Friday.
Printed in China
Utilitech & UT Design
® is a registered trademark of LF, LLC.
All Rights Reserved.
Lowes.com
AA Mounting Clips HDW4314-U
PART DESCRIPTION PART #
AA
8
Lowes.com
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Fixture doesn’t light. 1. Power is off. 1. Check circuit breaker or
wall switch.
2. Bad wire connection. 2. Check wire splices.
3. Defective wall switch. 3. Replace switch.
Circuit breaker trips 1. Crossed wires or power 1. Check wiring connections.
when light is turned wire is grounded out.
on.
CARE AND MAINTENANCE
This unit is intended for indoor use only.
Do not modify this fixture. Any modifications may render the product unsafe.
Before cleaning your fixture, turn off the switch or power source. Wipe the lamp with a soft,
damp cloth.
•
•
•
6
Ceiling
Carefully route wires into fixture and push
recessed kit up flush to ceiling surface.
Attach the trim (C) to the lamp.
6.
Plug base cable connector on adaptor (A) into
lamp (B).
5.
INSTALLATION INSTRUCTIONS
B
5
Ceiling
C