Manualshelf

Installation Guide

ManualsBrandsUtilitech Pro ManualsLighting & Fans65-Watt Equivalent White LED Recessed Retrofit Downlight (Fits Housing Diameter: 5-in or 6-in)
12345678910
CC
C
C
B
3
Ceiling
6
INSTALLATION INSTRUCTIONS
Plug base cable connector on adaptor (A) into
lamp (B).
Squeeze torsion springs together as shown and
install into torsion spring brackets inside
recessed housing.
Carefully route wires into fixture and push
recessed kit up flush to ceiling surface.
Attach the trim (C) to the lamp.
Option #2: Install into the recessed housing without
torsion spring brackets
Take off the trim (C) before installing.
Make sure the power is turned off at the source
to the recessed housing(s) where the fixture(s)
will be installed.
3.
4.
1.
Lowes.com
4
Ceiling
2
B
7
INSTALLATION INSTRUCTIONS
Lowes.com
Mounting Clips x 3
Short Screws x 3
BB
AA
Remove both torsion springs by removing the
screw (CC) from each torsion spring.
2.
Place the lamp replacement instructions (D) inside
the housing. NOTE: This label provides
information about replacement lamps.
Screw adaptor (A) into socket in recessed housing.
4.
Attach mounting clips (AA) to lamp (B)
using short screws (BB).
Hardware Used.
3.
A
D
4
Ceiling
3
B
AA
AA
BB
BB
Mounting Clips
position for
6 in. housing
Mounting Clips
position for
5 in. housing
B
1