Installation Guide

D
C
PART DESCRIPTION QUANTITY
A Adaptor 1
B Lamp 1
C Trim 1
D
Lamp replacement
instructions label
1
Please read and understand this entire manual before attempting to assemble, operate or
install the product. Failure to do so could lead to electric shock, fire or other injuries which
could be hazardous or even fatal.
Be sure the electricity to the wires you are working on is shut off. Either remove the fuse
or turn off the circuit breaker.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
32
PACKAGE CONTENTS
DIMMER COMPATIBILITY LIST (SOLD SEPARATELY)
RECESSED CAN COMPATIBILITY LIST (SOLD SEPARATELY)
Due to the many recessed can options in the market, not all the cans have been tested.
The following are known recessed cans that are compatible with this item
HARDWARE CONTENTS (SHOWN TO SIZE)
A
B
Lowes.com Lowes.com
SAFETY INFORMATION
•
•
AA BB
Mounting Clips
Qty. 3
Short Screw
Qty. 3
Brands Series Model
LUTRON Lumea LG-600H-AL
LUTRON Diva DVW-603PGH-WH
LUTRON Diva C.L DVWCL-153PH-AL
LUTRON Skylark S-600PH-WH
LUTRON Rotary FS-5FH-DK
LUTRON Skylark S-600H-WH
Manufacturer/Brand Compatible
Halo H71CT(702225-BCL-232)
Halo H71CT(702225-BCL-305)
Halo H71CT(702225-BCL-331)
Halo H550RI CAT(702225-BCL-454)
Halo H750RI CAT(702225-BCL-313)
Halo H5RICAT(702225-BCL552)
Halo H27RICAT(702225-BCL667)
Halo H7ICAT (702225-BCL-451)
Halo H7RICAT(702225-BCL-334)
Utilitech 0409545 LW005001-102012
Utilitech 0354262 LW00501-102012
Utilitech 0290213 CR06ICAT
This downlight can be used with most dimmers to create your desired ambience with smooth
dimming to 10% of full light levels.
Visit www.Lowes.com to find up-to-date dimmer compatibility information.
Note: Mounting Clips (AA) and Short Screws (BB) will not be used if torsion spring is used for installation.