Installation Guide

ManualsBrandsUtilitech Pro ManualsLighting & Fans3-Pack 2.5-in Plug-In Under Cabinet LED Puck Lights

ITEM/ARTICLE/ARTÍCULO #0366093

MODEL/MODÈLE/MODELO #GU9163-BAL-I

3-PACK LED PUCK KIT

ENSEMBLE DE TROIS

RONDELLES À DEL

KIT DE 3 LÁMPARAS

CIRCULARES CON

BOMBILLAS LED

Note: Hardware shown actual size./Remarque : le matériel n’est pas montré grandeur nature./

Nota: Herrajes mostrados a tamaño real.

PACKAGE CONTENTS/CONTENU DE L’EMBALLAGE/CONTENIDO DEL PAQUETE

HARDWARE CONTENTS/QUINCAILLERIE INCLUSE/ADITAMENTOS

- 1 -

Fixture x1

Luminaire x1

Lámpara x1

Power Hub x1

Concentrateur x1

Centro de alimentación x1

Mounting Cap x1

Embout de fixation x1

Tapa de montaje x1

Cap Screw

Vis d'assemblage

Tornillo de tapa

Power Cord Mounting Clip

Dispositif de fixation des cordons d'alimentation

Sujetador de montaje para cables de alimentación

Mounting Screw

Vis de montage

Tornillo de montaje

Cord Mounting Clip

Dispositif de fixation des cordons

Sujetador de montaje para cables

Utilitech & UT Design® and Grounded in Quality® are registered

Utilitech, et le motif UT® et Grounded in Quality® sont des marques

Utilitech y el diseño UT® y Grounded in Quality® son marcas

Call customer service at 1-866-994-4148,

8 a.m. - 6 p.m., EST, Monday - Thursday,

8 a.m. - 5 p.m., EST, Friday.

Communiquez avec notre service à la

clientèle au 1 866 994 4148, entre 8 h et

18 h (HNE), du lundi au jeudi, ou entre

8 h et 17 h (HNE) le vendredi.

Comuníquese con nuestro Departamento de

Servicio al Cliente al 1-866-994-4148 de

8 a.m. a 6 p.m. de lunes a jueves y de 8 a.m.

a 5 p.m. los viernes, hora estándar del Este.

Questions/Des questions/¿Preguntas?

SAFETY INFORMATION/RENSEIGNEMENTS RELATIFS À LA SÉCURITÉ/INFORMACIÓN DE SEGURIDAD

Please read and understand this entire manual before attempting to assemble, operate or install the product. Save these

instructions in a location close to your light fixture so you can refer to them at a later time.

Veuillez lire tout ce mode d’emploi et vous assurer que vous le comprenez avant de tenter d’assembler, d’installer ou

d’utiliser le produit. Conservez ces instructions à proximité du luminaire afin de pouvoir les consulter ultérieurement.

Lea y entienda este manual antes de intentar ensamblar, utilizar o instalar el producto. Guarde estas instrucciones en un

lugar cercano a su lámpara, de esta manera podrá consultarlas posteriormente.

REPLACEMENT PART NUMBERS (HDW9163BAL)

NUMÉROS DES PIÈCES DE RECHANGE (HDW9163BAL)

NÚMEROS DE PIEZAS DE REPUESTO (HDW9163BAL)

ATTACH YOUR RECEIPT HERE

JOIGNEZ VOTRE REÇU ICI

ADJUNTE SU RECIBO AQUÍ

Serial Number/Numéro de série/

Número de serie

Purchase Date/Date d’achat/

Fecha de compra

Summary of content (6 pages)

PAGE 1
ITEM/ARTICLE/ARTÍCULO #0366093 Utilitech & UT Design® and Grounded in Quality® are registered trademarks of LF, LLC. All Rights Reserved. Utilitech, et le motif UT® et Grounded in Quality® sont des marques de commerce déposées de LF, LLC. Tous droits réservés. Utilitech y el diseño UT® y Grounded in Quality® son marcas registradas de LF, LLC. Todos los derechos reservados. MODEL/MODÈLE/MODELO #GU9163-BAL-I Questions/Des questions/¿Preguntas? Call customer service at 1-866-994-4148, 8 a.m. - 6 p.m.
PAGE 2
SAFETY INFORMATION CAUTION • DO NOT USE THIS FIXTURE WITH A DIMMING CIRCUIT. If you presently have dimmer controls, you will need to remove them and replace them with regular electrical switches. If you have a three-way dimmer, you will have to replace it with a regular three-way switch. If you are unfamiliar with electrical installations, it is recommended you have a qualified electrician do your installation. IMPORTANT SAFETY INSTRUCTIONS 1. Use only insulated staples or plastic ties to secure the cords.
PAGE 3
PREPARATION/PRÉPARATION/PREPARACIÓN Before beginning installation of product, make sure all parts are present. Compare parts with package contents list and diagram on previous page. If any part is missing or damaged, do not attempt to install the product. Contact customer service for replacement parts. Estimated Assembly Time: 30 minutes Tools Required for Assembly (not included): Phillips head screwdriver, safety glasses, drill, drill bit 1/16 inch.
PAGE 4
ASSEMBLY INSTRUCTIONS/INSTRUCTIONS POUR L’ASSEMBLAGE/INSTRUCCIONES DE ENSAMBLAJE 1. The LED light kit pucks may have 1 A the mounting caps (A) pre-installed on the top of the pucks (B) (depending on the production run). Rotate the cap counter clockwise and remove them. B Les kits d’appliques lumineuses rondes à DEL peuvent avoir des embouts de fixation (A) préinstallés sur le dessus des appliques rondes (B) (selon le lot de fabrication).
PAGE 5
ASSEMBLY INSTRUCTIONS/INSTRUCTIONS POUR L’ASSEMBLAGE/INSTRUCCIONES DE ENSAMBLAJE 6. Hold the power hub (C) up to the 6 mounting surface and mark the locations for the mounting screws (DD). Dimple the surface with either an awl, a nail, or drill a small pilot hole for the mounting screws (DD). Fasten the power hub (C) to the cabinet with two of C the included mounting screws (DD). Tenez le concentrateur (C) devant la surface de montage et marquez les emplacements des vis de montage (DD).
PAGE 6
CARE AND MAINTENANCE/ENTRETIEN/CUIDADO Y MANTENIMIENTO • You may want to periodically clean the fixture using a mild, non-abrasive glass cleaner and soft cloth. Do NOT use solvents or cleaners containing abrasive agents. When cleaning the fixture, make sure you have the power turned off and do not spray liquid cleaner directly onto the fixture, connection sockets, linking cord plug or switch.