SDS
1
MATERIAL SAFETY DATA SHEET
SECTION I – Product and Company Identification
Product Name: Utikem Total Alkalinity Increaser
Chemical Name: Sodium Bicarbonate
Synonyms: Baking Soda, Bicarbonate of Soda
Pure Substance/preparation: Substance
Formula: NaHCO3
Supplier: Qualco, Inc.
225 Passaic Street
Passaic, NJ 07055
Telephone: 973-473-1222
Fax: 973-473-0535
Manufacturer: Qualco, Inc.
225 Passaic Street
Passaic, NJ 07055
Telephone: 973-473-1222
Fax: 973-473-0535
Emergency: 1-800-424-9300 (ChemTrec)
SECTION II – Hazards Identification
Emergency Overview: Not classified as hazardous, white crystalline powder
Potential Health Effects
Acute Toxicity: No significant health effects
anticipated
Chronic Toxicity: No know effect
SECTION III – Composition/Ingredient Information
Chemical Name: Sodium Bicarbonate
CAS No.: 144-55-8
Weight %: 100
SECTION IV – First Aid Measures
Eye Contact: Flush eyes with water as a precaution. Get medical attention if irritation develops and
persists.
Skin Contact: Wash skin with soap and water. Get medical attention of irritation develops and
persists.
Inhalation: Remove person to fresh air. If signs/symptoms continue, get medical attention.
Ingestion: Drink plenty of water. Never give anything by mouth to an unconscious person. Get
medical attention if symptoms occur.
SECTION V – Firefighting Measures
Flammable Properties: Noncombustible
Flash Point: Not combustible
Suitable Extinguishing Media: Water spray, dry chemical, carbon dioxide (CO2), or foam
Hazardous Combustion Products: None
Explosion Data: Not sensitive to Mechanical Impact or Static Discharge
NFPA/HMIS Ratings Legend: Severe = 4 Serious = 3 Moderate = 2 Slight = 1 Minimal = 0
Health = 0 Flammability = 0 Stability = 0 Special Hazards - None
SECTION VI – ACCIDENTAL RELEASE MEASURES
Personal Precautions: Avoid dust formation
Methods for Containment: Material may be recycled when contamination is not a problem
Methods for Cleaning Up: Sweep up and shovel into suitable containers for disposal. Dispose of in
accordance with all applicable national environmental laws and regulations.
SECTION VII – Handling and Storage
Handling: Use air conveying mechanical systems for bulk transfer to storage. Provide appropriate
exhaust ventilation at places where dust is formed. In case of insufficient ventilation, wear suitable
respiratory equipment.
Storage: Keep in a dry, cool, well ventilated place. Keep away from heat. Keep away from
incompatible products (acids).