SDS
3
Skin Protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove’s outer surface) to avoid skin contact with this product. Dispose of contaminated gloves
after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Full or Splash Contact: Material-Nitrite Rubber. Minimum layer thickness 0.11 mm, Break through time-480
minutes.
If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the
supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial
hygienist and safety officer familiar with the specific situation of anticipated use by our customers, It should not
be construed as offering an approval for any specific use scenario.
Body Protection: Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work place. The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory: Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN143) dust masks. Use respirators and components tested and approved under
appropriate government standards such as NIOSH (US) or CEN (EU).
Control of Environmental Exposure: No special environmental precautions required.
9. Physical and Chemical Properties
Material is a Solid at normal conditions. (molecular wt. = 129.07)
Odor: Odorless
Appearance and Color: White, granular solid
Auto ignition Temperature: Not applicable
Decomposition Temperature: No data available
Coefficient of Oil/Water: log Pow: -1.31 at 25
o
C (77
o
F)
Flammability: No data available
Flash Point: Not flammable
Melting Point: >360
o
C (>680
o
F)
Odor Threshold: Not applicable
Oxidizing Properties: Not Applicable
pH: No data available
Evaporation Rate: No data available
Solubility In Water: No data available
Viscosity: No data available
Vapor Density: Not applicable
Vapor Pressure: Not applicable
Explosive Properties: No data available
10. Stability and Reactivity
Conditions To Avoid: No data available.
Stability: Stable under recommended storage conditions
Polymerization: Will Not Occur
Incompatible Materials: Strong Oxidizing Agents