Operating Instructions

to the perfect dot when used with a dot sight.
• Magnied view through a sharp dot sight provides
an instant improvement on accuracy without any
compromises.
► Versatile and Dependable Quick-detach Mounts for a
Wide Variety of Applications (SCP-MF3WQ)
• Low prole quick detachable mount with adjustable
positions for optimal eye relief.
• A smart riser raises the center height with adjustable
positions for further eye relief adjustment.
► Innovative and Solid Flip-to-Side Design for Tactical
Applictions (SCP-MF3WQS)
• At vertical position, medium prole to perfectly
co-witness with dot sights and AR iron sights,
providing 3X magnication for accurate aiming.
• At ip-over position, clear the view for quick aiming
with dot sight only.
• Easy one-hand switch
between two positions,
and solid locking in each
position with no wobbling
under recoil.
C. Mounting the Magnier:
CAUTION: Always ensure your
rie is UNLOADED, UNCOCKED and, where applicable,
the safety catch is applied before tting the scope. Practice
safe handling procedures at all times.
1. Follow proper installation procedures to install your dot
sight on the rie.
2. For SCP-MF3WQ, the magnier comes with a low prole
QD mount and a versatile riser. Use the mount only
or both mount and riser to match your dot sight center
height.
3. Hold the magnier behind the dot sight over the rie at
your natural shooting position. Locate a proper position
for the magnier so you can achieve a full eld of view.
The low prole QD mount works with or without the riser
to offer adjustable positions for optimal eye relief shown
in Fig 1. It may require adjustment of the dot sight
position.
Fig 1.
4 of 8