LEAPERS , INC. ® magnifier Complete Installation and Operating Instructions w w w. l e a p e r s .
Leapers, Inc. MUO006011104 Proudly Presents UTG OPTICS magnIfIerS SCOPeS DOT SIgHTS TOTAL SOLUTION TO YOUR NEEDS -COMMITMENT TO BEST QUALITY, BEST VALUE AND BEST SERVICE- www.LEAPERS.com 32700 Capitol Street, Livonia, MI 48150, U.S.A. Tel:(734)542-1500 Fax:(734)542-7095 Email:office@leapers.
UTG NEW GEN 3X magnifier MODEL NO.
UTG FLIP-TO-SIDE 3X MAGNIFIER MODEL NO.
A. Specifications Magnification 3X Objective Diameter 25mm Field of View 9° Exit Pupil Diameter 8.7mm Eye Relief 51mm Dioptric Adjustment +/- 1 D Tube Length 102mm Weight SCP-MF3WQ : 260g SCP-MF3WQS : 280g Lens Coating Broadband Multi-layer Compatible Rail Picatinny/Weaver B. Major Features: ► Rock Solid Robust Construction with High Quality Precision Machined Parts ► ► • Precision machined to exact tolerances from aircraft-grade aluminum alloy for maximum strength.
to the perfect dot when used with a dot sight. • ► ► Magnified view through a sharp dot sight provides an instant improvement on accuracy without any compromises. Versatile and Dependable Quick-detach Mounts for a Wide Variety of Applications (SCP-MF3WQ) • Low profile quick detachable mount with adjustable positions for optimal eye relief. • A smart riser raises the center height with adjustable positions for further eye relief adjustment.
4. For SCP-MF3WQS, go to Step 5 directly. For SCP-MF3WQ, based on your selection in Step 2, attach the mount/riser as follows: • For QD Mount Only: The mount comes with 3 locking holes allowing space adjustment to achieve optimal eye relief. The mount can be used bi-directionally per your preference. Fig 2. Locate two set screws and install a spring washer onto each screw.
5. Align and install the magnifier onto the Picatinny rail with the position selected in Step 3. Follow instructions below to adjust for optimal tension for quick detach, locking and unlocking. a. Turn the Cam Lever toward its unlocked position as shown in Fig 4. Place the QD mount on the Picatinny rail at the desired position. Make sure to seat the cross bolt into a selected slot. Fig 4. b.
Fig 6. Fig 5. E. Adjusting Focus / Diopter Setting: NOTE: Different individuals will have different eye focus which will result in different diopter setting. A person will use different diopter settings with or without eye glasses. The repeating process below may cause eye strain and contribute to parallax error. It will help if you can briefly look away from the eye piece and then look back through it. 1. Aiming your dot sight/magnifier at a distant target. 2.
5. Do not attempt to lubricate any part of the magnifying scope. 6. Do not disassemble the magnifying scope. Do not loosen or remove screws or parts. Any such or similar actions will void the warranty. CAUTION: Viewing the sun can cause serious eye injury. Never look directly into the sun with this or any scope. G. Lifetime Manufacturer’s Warranty Warranty against material or workmanship defects applies based on the following conditions - • Magnifier scope was a first-hand purchase.
e r o l p x E More At artered headqu en s, Inc., has be Leaper U.S.A., n, ga lying in Michi of supp siness r bu e td th ou oo in ing and g, hunt set unshootin 91. We 19 e r fo nc dards gear si gh stan ised hi ions. operat comprom ss ne r busi a total all of ou provide ts al is to produc Our go y line of an r ion fo n e attent solutio pay clos e er W om r.
