Operating Instructions
4 5
a. scope parts illustration
Read entire manual before
mounting your scope.
Make sure the rearm
is not loaded upon
installation.
!
WARNING:
G
R
02
03
04
05
11
01
12
13
08
09
10
07
06
14
Note:
Scope diagram is for illustration purposes only,
not intended to represent your actual product
appearance.
PARTS LIST
01 Ocular Lens
02 Eyepiece Assembly
03 EZ-TAP Control Panel (For Reticle Illuminated
Models with IE Capability, Position may Vary)
04 Battery Chamber (for EZ-TAP Scope Only, Position
may Vary)
05 Power Ring (For Variable Power Models Only)
06 Windage Adjustment Knob
07 Elevation Adjustment Knob
08 Zero Resetting Hex Screw (For Models with Center
Hex Screw in Turrets)
09 Reticle Illumination Rheostat (For Reticle
Intensied Models Only)
OR
Parallax Adjustment Side Wheel (For Side AO
Models Only)
10 Zero Locking Ring (For Models with Zero Locking
Function)
11 Objective Parallax Adjustment Ring (For Front AO
Models Only)
12 Objective Lens Protective Ring (For Models with
Protective Ring)
13 Objective Lens
14 Integral Sunshade (For Models with Angled
Objective Bell)