User's Manual

1.2. Maximum 100 mW e.i.r.p.
Permitted for use SRD for outdoor
applications without restriction on
installation height only for purposes of
gathering telemetry information for
automated monitoring and resources
accounting systems. Permitted to use
SRD for other purposes for outdoor
applications only when the installation
height is not exceeding 10 m above
the ground surface. 1.3 maximum
100 mW e.i.r.p. indoor applications.
2. SRD with DSSS and other than
FHSS wideband modulation
2.1. Maximum mean e.i.r.p. density is
2 mW/MHz. Maximum 100 mW e.i.r.p.
2.2. Maximum mean e.i.r.p. density is
20 mW/MHz. Maximum 100 mW
e.i.r.p. It is permitted to use SRD for
outdoor applications only for purposes
of gathering telemetry information for
automated monitoring and resources
accounting systems or security
systems.
2.3. Maximum mean e.i.r.p. density is
10 mW/MHz. Maximum 100 mW
e.i.r.p. indoor applications.
Ukraine
Limited
implementation
e.i.r.p. ≤100 mW with built-in antenna
with amplification factor up to 6 dBi.
The following information shall also be included in the case of radio equipment
intentionally emitting radio waves:
(a) frequency band(s) in which the radio equipment operates;
(b) maximum radio-frequency power transmitted in the frequency band(s) in
which the radio equipment operates.
2012/19/EU (WEEE directive): Products marked with this
symbol cannot be disposed of as unsorted municipal waste
in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated
collection points. For more information see:
www.recyclethis.info.