User's Manual

Installation Guide 25
The camera housing and hardware are designed and
manufactured to ensure corrosion protection. However, it is
necessary to seal the cable connection during the installation
work. Following all local codes, use electrical tape or a
corrosion-resistant conduit box to connect the cables as
required.
Note: Sealing the microphone hole impacts the sensitivity of
camera audio input.
Specifications
TruVision IP wedge cameras
Electrical
Voltage input
12 VDC, PoE (IEEE 802.3af)
Power consumption
Max. 5 W
Wi
-Fi parameters
Wi
-Fi standard IEEE802.11b/g/n
Frequency range
2.4 to 2.4835 GHz
Communication
bandwidth
Support 20/40 MHz
Security
64/128-bit WEP, WPA/WPA2, WPA-
PSK/WPA2-PSK, WPS
Transmission rate
11b: 11Mbps, 11g: 54Mbps, 11n: up
to 150Mbps
Transmission range
Up to 50 m
* It varies depending on the actual
working environment.