User's Manual

Table Of Contents

Reset cameras to factory default

If required, a camera can be reset to the factory default settings.

Reset button

1. Remove the camera cover, press and hold the WPS/RESET

button, and then remove power from the camera.

2. Apply power to the camera and continue holding the

WPS/RESET button for 20 seconds.

Camera configurator

1. Launch the camera configuration browser interface.

2. Select System and then select Maintenance on the left menu.

3. Click Restore or Default to restore the default settings.

Note: After restoring the default settings, the IP address is also

restored to the default IP address.