GE616 Proximity Reader Last Update August 24, 2005
GE616 Proximity Reader Last Update August 24, 2005 Table of Contents 1. Important safety instructions 3 2. Introduction 5 3. Identifying supplied parts 5 4. Specification 6 5. Installation 6 6. Wire Connection to Controller 7 7. Wire Color Table of the Reader 7 8. Operation 8 9. The Maximum Length of the Wiegand Cable 9 10. FCC Registration Information 10 11.
GE616 Proximity Reader Last Update August 24, 2005 1. Important safety instructions To prevent injuries to persons and damages to property, please read all the instructions and follow them whenever you deal with this product. After reading, please put this instruction manual where it can be easily seen for the system operator. ON INSTALLATION AND POWER Use 12V DC power ONLY. - Connecting to higher than 12V DC may result in a risk of electric shock, fire, or heavy damage of the unit.
GE616 Proximity Reader Last Update August 24, 2005 ON MAINTENANCE Do NOT use any kind of liquid for cleaning. - There may be a risk of electric shock, fire or heavy damage of the unit. Use an air spray, if needed. Users are cautioned NOT to attempt repair of this product or modify the wirings set by the installer at their own discretion. - It may pose the risk of fire, hardware damages, or abnormal operations of the unit.
GE616 Proximity Reader Last Update August 24, 2005 2. Introduction The GE616 is an elegant looking and an attractive 4" read range proximity reader which can be mounted to metal door frame (mullion) or any flat wall surface. The GE616 is epoxy potted that ensure you successful operation even in harsh environments. Two colors LED of green and red, inside Piezo buzzer sound will guarantee you an accurate and reliable system operations. 3.
GE616 Proximity Reader Last Update August 24, 2005 4. Specification Read Range/Time Input Voltage/Current Output Format External Buzzer Control Input External LED Control Input LED/Buzzer Color Operating Environment Overall Size (WxHxD) Weight Up to 4"(10cm) / 30ms DC 5V ~ 17V, Max. 100mA 26 bit Wiegand Low Active, DC 0 ~ 12V, Max. 50mA Low Active, DC 0 ~ 12V, Max. 50mA 2 Color LED (Red and Green) / Piezo Buzzer Silver -31℉ ~ 149℉(-35℃ ~ +65℃) 10~90% Humidity, Non-Condensing 1.82"x4.81"x0.
GE616 Proximity Reader Last Update August 24, 2005 6.
GE616 Proximity Reader Last Update August 24, 2005 7. Wire Color Table of the Reader POWER Power(DC +5V~+17V) Power(DC Ground) INPUT Buzzer control input LED control input OUTPUT(Wiegand Format) Wiegand Data-0 Wiegand Data-1 DC(+) DC(-)(GND) Red wire Black wire BUZZER LED Blue wire Yellow wire Data-0 Data-1 Green wire White wire 8. Operation 8-1. Apply power and you can see Red LED is on indicating the reader is in standby. 8-2.
GE616 Proximity Reader Last Update August 24, 2005 8-4. Buzzer Control When the reader reads proximity card, only one beep sound generates in normal operating mode but you can generate more beep sounds to distinguish whether the access is granted or denied. To generate more beeps, you may control the Buzzer Control Input(Blue wire) to power ground then you can turn beeper on while you hold Buzzer Control Input to power ground. 9.
GE616 Proximity Reader Last Update August 24, 2005 10. FCC Registration Information FCC REQUIREMENTS PART 15 Caution: Any changes or modifications in construction of this device which are not expressly approved by the responsible for compliance could void the user's authority to operate the equipment. NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; 1. This device may not cause harmful interface, and 2.
GE616 Proximity Reader Last Update August 24, 2005 11. Warranty and Service TWO YEARS LIMITED WARRANTY AND LIMITATION OF LIABILITY GE Security warrants that this product will be free of defects in material and workmanship for a period of two years from date of purchase under normal consumer use. Losses caused by modification, improper installation or use, abuse, and acts of God are not covered. GE’s obligation is limited to repair or replacement of the defective product at GE’s option.
GE616 Proximity Reader Last Update August 24, 2005 The specification contained in this manual are subject to change without notice at any time. GE Security Asia Ltd. Suites 503-506, 5/F Tower 1, The Gateway, 25 Canton Rd, TST.
GE616 Proximity Reader Last Update August 24, 2005 MEMO 13
GE616 Proximity Reader Last Update August 24, 2005 MEMO 14
GE616 Proximity Reader Last Update August 24, 2005 MEMO 15
