User Manual

Chapter 4
Programming
57
When both sensor-activated light lockout start time and sensor-activated light lockout stop time are turned off
and the sensor-activated lights feature is on, sensor-activated lights turn on at all times.
System tests
Table 26. Light control
Function Default Description
Set entry lights: Entry light unit,
1 through 8
Off This menu allows the user to set X-10 lights with unit numbers from 1
to 8 as entry lights (On).
Sensor light # 01 to 40 In this menu, each enrolled sensor can be associated with an X-10
light with unit number from 1 to 8 (or Off for no association).
Light schedules Light schedule,
1 through 8
Off In this menu, a light schedule can be programmed for each X-10
module with unit number from 1 to 8.
Housecode A
Lock interval (Light) lock
interval
Blank This option sets the daily lockout time during which sensor trips do
not activate associated X-10 lights
Table 27. System tests
Function Default Description
System tests Comm test The communication test is used to check the phone communication
between the panel and the central station or voice report
destination.
Sensor test The sensor test is used to check proper sensor operation.
System
download
a
a. Not investigated for use by UL.
This feature initiates a phone call from the panel to the Enterprise
Downloader.