User Manual

Simon XT
Installation Manual
42
Exit extend On Determines whether the panel restarts the exit delay time if the user enters the armed
premises during the initial exit delay period (on), or not (off). Turning on this feature
allows users to reenter during the exit delay period, without disarming and then
rearming the system. Turning off this feature requires the user to disarm and rearm the
system.
Note: Autoarm must be on for this option to work.
Secure arming Off Determines whether an access code is required when arming the system (on) or not
(off). This option does not affect keyfob arm/disarm operation.
No arm on low
battery
Off Determines whether the system protests arming if a low CPU battery condition exists
(on) or not (off).
Quick exit Off Determines whether pressing DISARM when the system is armed activates the exit
delay time to allow exit and reentry without disarming the system (on) or not (off).
This feature is useful if the user wants to step outside briefly and return, such as to get
the paper. If the system is armed and the user presses DISARM, the panel announces
Exit time is ON and sounds exit delay beeps. This allows a designated entry/exit door to
be open for up to 2 minutes without causing alarm. When the door is closed, the beeps
stop and the door is armed again.
Note: For UL listed systems, Quick Exit must be Off.
Downloader
enable
a
On Enables programming of system options with downloader software.
Sup protest
a
Off Determines whether the panel protests arming if it has not received a supervisory
signal from any sensor 15 minutes before arming (on) or not (off).
Note: This feature must be turned off for US installations.
a. Not investigated for use by UL.
Table 13. Security (continued)
Function Default Description