User Manual
Table Of Contents
- Preface
- Chapter 1 Introduction
- Chapter 2 Planning
- Chapter 3 Installing the system
- UL listed installations
- SIA system requirements
- Central station reporting
- UL Canada listed installations
- California state fire marshall listed installations
- Opening panel cover and chassis
- Mounting the panel
- Connecting hardwired devices
- Wiring a phone line to the panel
- Wiring the power transformer
- Installing X10 modules
- Chapter 4 Programming
- Programming overview
- Menu navigation
- System programming
- Resetting memory to the factory defaults
- Chapter 5 Testing
- Chapter 6 Troubleshooting and support
- Appendix A Specifications and tables
- Index
Simon XT
Installation Manual
40
Access codes
Table 12. Access codes
Function Default Description
Dealer code 4321 You can use the dealer code to program all system options, including high-security
options that are not accessible with the installer code if it is different from the dealer
code. Changing the dealer code to differ from the installer code will prevent the installer
from viewing certain fields.
1. Change the dealer code.
2. Enter program mode with the installer code.
3. Installer should no longer be able to see the following:
Code length, Downloader code, Phone lock, Phone #1, Phone #2, Phone 1 report mode,
Phone 2 report mode, HW1 function.
Installer code 4321 You can use the installer code to program most installer options, except for high-
security dealer options.
Master code 1234 Master arm/disarm code.
Master code able to enter user programming and bypass sensors.
User codes 1 to
8
Blank Regular arm/disarm code.
Duress code Blank Use in place of master or user code to cause a silent alarm.
Code length Four digits Code can be three to six digits long.