User Manual
Table Of Contents
- Preface
- Chapter 1 Introduction
- Chapter 2 Planning
- Chapter 3 Installing the system
- UL listed installations
- SIA system requirements
- Central station reporting
- UL Canada listed installations
- California state fire marshall listed installations
- Opening panel cover and chassis
- Mounting the panel
- Connecting hardwired devices
- Wiring a phone line to the panel
- Wiring the power transformer
- Installing X10 modules
- Chapter 4 Programming
- Programming overview
- Menu navigation
- System programming
- Resetting memory to the factory defaults
- Chapter 5 Testing
- Chapter 6 Troubleshooting and support
- Appendix A Specifications and tables
- Index
Chapter 2
Planning
15
System options menu
RF Jam detect (must be
added for UL listed systems)
Off Off On/Off D, I
Demo mode
b
Off Off On/Off D, I
HW1 function 1 Off 1 - Interior siren output
2 - Output activated when
armed
3 - Output activated when
disarmed
4 - FTC output (FTC must be on)
5 - Output activated for alarm
Off - No output
D
24-hour clock Off Off On/Off D, I
Siren options menu
Panel piezo beeps (must be
on for UL listed systems)
On Off On/Off D, I, M
Panel voice On Off On/Off D, I, M
Panel piezo alarms (must be
added for UL listed systems
or a siren must be
connected
On Off On/Off D, I, M
Trouble beeps (must be
added for UL listed systems)
On Off On/Off D, I
Voice chime Off Off Off - No voice chime
1 - Voice chime (sensor name)
2- Chime bell
3- Soft chime bell
D, I
Status beeps volume 7 7 1 - 10 D, I, M
Hardwired siren supervision Off Off On/Off D, I
Speaker volume 8 8 1 to 8 D, I, M
Panel silent police panic Off Off On (silent), Off (audible) D, I
Panel tamper alarm Off Off On/Off D, I
Alarm report verification Off Off On/Off D, I
Table 6. System programming menu options (continued)
Function Default Delete Range Access
code
a
Installer
settings