User Manual
Table Of Contents
- Preface
- Chapter 1 Introduction
- Chapter 2 Planning
- Chapter 3 Installing the system
- UL listed installations
- SIA system requirements
- Central station reporting
- UL Canada listed installations
- California state fire marshall listed installations
- Opening panel cover and chassis
- Mounting the panel
- Connecting hardwired devices
- Wiring a phone line to the panel
- Wiring the power transformer
- Installing X10 modules
- Chapter 4 Programming
- Programming overview
- Menu navigation
- System programming
- Resetting memory to the factory defaults
- Chapter 5 Testing
- Chapter 6 Troubleshooting and support
- Appendix A Specifications and tables
- Index
Simon XT
Installation Manual
2
Product overview
This security system can be used as a fire warning system, an intrusion alarm system, an emergency
notification system, or any combination of the three. The system (Figure 1) has three types of components:
• Self-contained control panel
• Devices that report to the panel
• Devices that respond to commands from the panel
Note: The keyfob and X10 modules have not been investigated by UL.
Figure 1. Simon XT system
Note: The universal, lamp, and appliance modules require a special transformer.
The self-contained panel provides the main processing unit for all system functions. It receives and responds to
signals from wireless sensors and wireless touchpads throughout the premises. For monitored systems, the
panel can be connected to the premises phone line for central monitoring station reporting.
You can program the panel onsite from the keypad or remotely using Enterprise Downloader software. See
Programming on page 33 for complete onsite programming instructions.
X10 universal module
Door/window sensor
PIR motion sensor
Smoke detector
X10 appliance module
X10 lamp module
Keyfob
Remote
handheld
touchpad