User's Manual

1
,QVWDOODWLRQ,QVWUXFWLRQV
Preliminary 9/24/04
ZZZJHVHFXULW\FRP
*(6HFXULW\
'
Product
Summary
The touchpad controls a Concord 4 system and receives RF signals from the panel or a trans-
ceiver to display system messages and sound system status beeps and alarms.
Installation Installation Guidelines
• The touchpad can be portable or mounted on a wall.
• Concord
™
systems can accommodate a maximum of 96 wireless sensors/zones.
• Do not mount the touchpad in areas that are likely to expose it to moisture.
• Avoid areas with excessive metal or electrical wiring, including furnace and utility rooms.
Tools and Supplies
• Screwdrivers
• Drill with bits
• Mounting screws and anchors (included)
Mounting
The touchpad can be mounted on any interior wall (protected from the elements).
¾
To mount the module on a wall:
1.
2.
3.
Figure 1.Mounting Hole Locations
4.
5.
6. I
Figure 2.Attaching Touchpad to Mounting Plate
Figure Under Construction
Figure Under Construction
'RFXPHQW1XPEHU;;5HY$
6HSWHPEHU
35(/,0,1$5<
'LDORJ,FRQL]HG/&'7RXFKSDG
3DUW1R5