User's Manual
Table Of Contents
- Part No. 60-XXX
- Palm Key System
- Product Summary
- Setting up the PKS
- Learning the Palm Key into the Security System
- Programming Jobs
- 1. Enter the password at the AptAcc Login screen.
- 2. Select the Workman ID or select Add New to create a new workman.
- 3. Select the Building # that can be accessed or select All Bldgs to allow access to all.
- 4. Select the Unit Number # that can be accessed or select All Units to allow access to all units in the specified Building #.
- 5. Using the arrows select the Job Minutes. (30-240 minutes in 30 minute intervals) or select No Limit to allow an unlimited amount of time in the unit.
- 6. Click on the field next to Time Restrict to enter the start and end time of the Time Restrict range.
- 7. Click the start time, then the end time. The program returns to the AptAcc Site Manager screen.
- 8. Use the arrows to select the # of Days before the job will expire. (1-254 days) or select No Limit to allow the job to have the job never expire.
- 9. Use the arrows to select the # of Uses the job will allow (1-1000 uses) or select No Limit to allow an unlimited number of uses.
- 10. Click Add to create the job.
- Using the PKS
- Specifications
- Notices
2
Palm Key System Installation Instructions
Preliminary 6/24/03
9. Use the arrows to select the # of Uses the job will allow (1-1000 uses) or select No Limit
to allow an unlimited number of uses.
10. Click Add to create the job.
Using the PKS After a job has been created the Palm can be used to access units specified in the job.
Disarming the System
1. Enter the Workman ID in the password field of the AptAcc login screen.
2. Select the Building.
3. Select the Unit.
4. Click Disarm
Arming the System
1. Enter the Workman ID in the password field of the AptAcc login screen.
2. Select the Building.
3. Select the Unit.
4. From the AptAccess screen click Arm.
Specifications Compatibility: ........................... Allegro, Concord Express
Frequency:................................. 319.5 MHz
Notices FCC Notices
FCC Part 15 Information to the User
7KLVGHYLFHFRPSOLHVZLWKSDUWVRIWKH)&&UXOHV2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWZRFRQGLWLRQV
7KLVGHYLFHPD\QRWFDXVHKDUPIXOLQWHUIHUHQFH
7KLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHUHFHLYHGLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHGRSHUDWLRQ
&KDQJHVRUPRGLILFDWLRQVQRWH[SUHVVO\DSSURYHGE\*(,QWHUORJL[FDQYRLGWKHXVHU·VDXWKRULW\WRRSHUDWHWKHHTXLSPHQW
)&&,'%=33;
6HFRQG6WUHHW1RUWK
1RUWK6DLQW3DXO01
7HFKQLFDO6XSSRUW
)
*(,QWHUORJL[
*(,QWHUORJL[$OOHJURDQG&RQFRUGDUHWUDGHPDUNVRI*(LQWHUORJL[3DOPLVD
WUDGHPDUNRI3DOP,QF+RW6\QFLVDUHJLVWHUHGWUDGHPDUNRI3DOP,QF$OORWKHUWUDGH
PDUNVDUHSURSHUWLHVRIWKHLURZQHUV
$OOULJKWVUHVHUYHG