User's Manual
Table Of Contents
- Product Summary
- Installation Guidelines
- Wall Mount Adapter
- Belt Clip Adapter
- Wrist Adapter
- Pendant Adapter
- To use the pin-mounted necklace adapter:
- 1. Check to make sure the necklace or chain fits through the larger hole in the pin-mounted neckl...
- 2. Remove one of the spring-loaded pins from the plastic wrist band and insert it into the smalle...
- 3. Compress the spring- loaded pins with a small screw driver and slip into the pin slots located...
- To use the pendant adapter:
- To use the pin-mounted necklace adapter:
- Programming
- Testing the Panic Button
- Replacing the Battery
- Lithium Battery Disposal
- Specifications
- Listings
- Notices
- Micro Wristwatch Panic Button
3
Micro Wristwatch Panic Button
Notices
Preliminary 9/11/01
UL 1610: Central Station Burglar Alarm Units (applied for)
UL 1637: Home Health Care Signaling Equipment
(applied for)
Notices
This device complies with FCC Rules Part 15. Operation is subject to the
following two conditions.
This device may not cause harmful interference.
This device must accept any interference that may be received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by Interactive Technolo-
gies, Inc. can void the user’s authority to operate the equipment.
FCC ID: B4Z-781A-PANIC (located on back of Panic Button).
US Patents 4,855,713; 4,864,636, and others pending.
2266 Second Street North | North Saint Paul Mn | 55109 | 800-777-2624 | www.interlogixinc.com
©2001 Interlogix,™ Inc. Interlogix is a trademark of Interlogix, Inc. ITI, is a registered trademark of Interlogix, Inc.