User manual

Default Setting (System Menu)
8-90
2 Press the OK key. The Printer menu appears.
3 Press the  or  key to select [FormFeed
Timeout].
4 Press the OK key. FormFeed Timeout appears.
5 Press the  or  key to set the Form Feed
Timeout. You can set the timeout delay in seconds.
You cannot use the numeric keys to enter this
value.
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
LF Action
Set the line feed action when the machine receives the line feed code (character code 0AH). The table below
shows the available settings. The default setting is LF Only.
Use the procedure below to specify a LF action.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Printer].
Printer: a b
*********************
2 Color Setting
3 EcoPrint
[ Exit ]
1 Emulation Set.
FormFeed TimeOut: D b
(5 - 495)
******30* Sec.
Item Description
LF Only Only line feed performed.
LF and CR Line feed and character return performed.
Ignore LF No line feed performed.
Sys. Menu/Count.: a b
7 Copy
*********************
9 Send
[ Exit ]
8 Printer