User manual

Standard Functions
RS232 Output Data Format
The output data from the RS232 is as follows:
The current axis data for the axes available on the system are transmitted.
For two axes systems, only two axes of data will be transmitted.
The data packet structure of 12 characters is defined as follows:
The Axis ID is the representation of the axis at the time of printing. This will be shown by 1
(1st axis), 2 (2nd axis) or 3 (3rd axis). Please see example below:
Example:
A : 0 0 0 0 0 0 0 0 0 CR LF
Axis ID
Separator
9 characters for position
Carriage
return
character
Line feed
character
The example below shows an RS232 output from a 3 axis DP700.
1: 531.420
2: 497.615
3: 15.006
24