Service manual

2DA/2DB

1-6-5

(2) Detaching and refitting the forwarding pulley and paper feed pulley

Follow the procedure below to replace the forwarding pulley and paper feed pulley.

Procedure

1. Remove the lower paper feed unit (see page

1-6-3).

2. Remove the drum unit (see page 1-6-38).

3. Remove the rear cover.

4. Remove the paper feed clutch, stop ring and

bushing at the machine rear.

Bushin

Paper feed clutch

Stop ring

Upper paper feed unit

Figure 1-6-7

Figure 1-6-6

Figure 1-6-5

5. Remove the screw and then the registration

guide.

6. Remove the screw and then the upper paper

feed unit.

Registration guide