Service manual

2AV/X
1-3-20
1-3
Photo original density
Adjusts the exposure to be used when photo
original is selected for the image mode.
1. Select “Photo original density set” and press
the enter key.
2. Select the setting and press the enter key.
Setting range: 1 to 7
Text original exposure adjustment
Adjusts the exposure to be used when text original
is selected for the image mode.
1. Select “Text original density set” and press the
enter key.
2. Select the setting and press the enter key.
Setting range: 1 to 7
Paper selection
Sets whether the same sized paper as the original
to be copied is automatically selected.
1. Select “Paper selection” and press the enter key.
2. Select “Auto” or “Manual” and press the enter
key.
AMS mode
Selects whether auto magnification selection or
100% magnification is to be given priority when the
sizes of the original and copy paper are different.
1. Select “AMS mode” and press the enter key.
2. Select “AMS” or “100%” and press the enter key.
Copy limit
Sets the number of copies limit for multiple copying.
1. Select “Copy limit” and press the enter key.
2. Enter the setting and press the enter key.
Setting range: 1 to 250 copies
Margin width
Sets the default setting of the margin width for the
margin copying.
1. Select “Margin width” and press the enter key.
2. Enter the setting and press the enter key.
Setting range: Metric
1 to 18 mm
Inch
1
/
4
" to
3
/
4
" (in
1
/
8
" increments)
Border erase width
Sets the default setting of the border erase width
for the border erase mode.
1. Select “Border Erase Width” and press the
enter key.
2. Select the setting and press the enter key.
Setting range: Metric
6/12/18 mm
Inch
1
/
4
"/
1
/
2
"/
3
/
4
"
Default drawer
Sets the drawer to be selected in cases such as
after the reset key is pressed.
1. Select “Default drawer” and press the enter
key.
2. Select the default drawer and press the enter
key.
Default drawer: 1st pap. (SOURCE 1)/2nd
pap. (SOURCE 2)/3rd pap. (SOURCE 3)/4th
pap. (SOURCE 4)
Note: 3rd pap. (SOURCE 3) and 4th pap.
(SOURCE 4) are displayed only when the
optional drawer is installed.
Output form
Selects whether or not to perform sort copying
automatically when the DF is used.
1. Select “Output form” and press the enter key.
2. Select “Sort: ON” or “Sort: OFF” and press the
enter key.
Note: If the DF is not installed, this setting item
will be displayed but ineffective.
Rotate sort
Sets whether or not to perform rotate sort copying
when the sort mode is selected.
1. Select “Rotate sort” and press the enter key.
2. Select “On” or “Off” and press the enter key.
Note: This setting item will not be displayed if
the optional finisher is installed.
(7) Machine default
Status report
Prints the details of the default settings.
1. Select “Status report” and press the enter key.
If A4/11" × 8
1
/
2
" paper is present, the list is
automatically printed out. Otherwise, select
the paper source and press the start key.
Auto shutoff
Sets whether the auto shutoff function is available.
1. Select “Auto shut-off” and press the enter key.
2. Select “On” or “Off” and press the enter key.
Special paper
If special paper such as colored paper and
recycled paper is loaded, a sign (*) indicating
special paper can be shown beside the paper size
for the drawer that contains special paper.
1. Select “Special paper” and press the enter key.
2. Select the paper source and press the enter key.
Paper source: 1st pap. (SOURCE 1)/2nd pap.
(SOURCE 2)/3rd pap. (SOURCE 3)/4th pap.
(SOURCE 4)
Note: 3rd pap. (SOURCE 3) and 4th pap.
(SOURCE 4) are displayed only when the
optional drawer is installed.