Service manual

2AV/X
1-3-15
1-3
(3) Copy default
User status report
Prints the details of the default settings.
1. Select “F01” and press the enter key.
If A4/11" × 8
1
/
2
" paper is present, the list is
automatically printed out. Otherwise, select
the paper source and press the start key.
Exposure mode
Selects the image mode at power-on.
1. Select “F02” and press the enter key.
2. Select the exposure mode and press the enter
key.
Exposure mode: 1 (auto exposure)/
2 (text & photo)/3 (photo)/4 (text)
Exposure steps
Sets the number of exposure steps for the manual
exposure mode.
1. Select “F03” and press the enter key.
2. Select “5 steps” or “9 steps” and press the
enter key.
Setting range: 1 (5 steps)/2 (9 steps)
Auto exposure adjustment
Adjusts the exposure for the auto exposure mode.
1. Select “F04” and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 to 7
Text and photo original exposure adjustment
Adjusts the exposure to be used when text and
photo original is selected for the image mode.
1. Select “F05” and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 to 7
Text original exposure adjustment
Adjusts the exposure to be used when text original
is selected for the image mode.
1. Select “F06” and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 to 7
Photo original exposure adjustment
Adjusts the exposure to be used when photo
original is selected for the image mode.
1. Select “F07” and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 to 7
Paper selection
Sets whether the same sized paper as the original
to be copied is automatically selected.
1. Select “F08” and press the enter key.
2. Select “auto” or “manual” and press the enter
key.
Setting range: 1 (auto)/2 (manual)
AMS mode
Selects whether auto magnification selection or
100% magnification is to be given priority when the
sizes of the original and copy paper are different.
1. Select “F09” and press the enter key.
2. Select “auto magnification selection” or “same
size” and press the enter key.
Setting range: 1 (auto magnification selection)/
2 (same size)
(2) Setting department management items
Turning department management on/off
1. Select “d01” and press the enter key.
2. Select “copy management on” or “copy
management off” and press the enter key.
Setting range: 1 (copy management on)/
2 (copy management off)
Registering a new department code
1. Select “d02” and press the enter key.
2. Enter a department code* using the numeric
keys and press the enter key.
* 4 digits for metric specifications and 7 digits
for inch specifications.
Deleting a department code
1. Select “d03” and press the enter key.
2. Enter the department code to be deleted using
the numeric keys and press the enter key.
Clearing copy counts
1. Select “d04” and press the enter key.
2. Select “clear” or “do not clear” and press the
enter key.
Setting range: 1 (clear)/2 (do not clear)
Printing management list
1. Select “d05” and press the enter key.
If A4/11" × 8
1
/
2
" paper is present, the list is
automatically printed out. Otherwise, select
the paper source and press the start key.
Printer department management setting
Note: This setting item will only be displayed when
the optional printer board is installed and the
department management is turned on.