Operation Manual

Installation
NOTE: The first time the keyboard is used you will need to fully charge
the battery.
Step 1 – Prepare the keyboard
• Turn the keyboard to the ON position, the blue led will light up for
2 seconds.
• Press the pair (connect) button; the blue LED will flash when in
pairing mode.
• The keyboard is now ready to connect with a Bluetooth ready
system.
pair/connect button
Step 2 – Connect to a Bluetooth ready system
• On the Bluetooth ready system turn Bluetooth ON
• The device should detect the keyboard and provide a way to pair
the device. This will include a code or pin that will need to be typed
onto the keyboard to finish the pairing process.
Detailed installation instructions immediately
follow the Keyboard Matrix.
Note: If no signal is received after 10 minutes or the connected device
is turned off, the keyboard will revert to Standby Mode. To reactivate
the keyboard, click the Enter key on the keyboard.
Charging the keyboard:
1. When the power is low, the blue LED will light up for 1 second and
will blink intermittently.
2. To charge connect the keyboard to a powered USB port with the
provided micro USB Cable.
3. When charging, the Red LED will light up; then will turn off when
charge is completed.