User Guide

ManualsBrandsUSRobotics ManualsComputers & AccessoriesU.S. Robotics 56K Faxmodem PCI for Windows

NOTE: If your modem is not listed and/or you do not

see a series of commands and responses, make sure

that your internal modem is physically installed

correctly in your computer. With the power off, press

the modem in firmly so that it is seated properly in its

slot. When the modem is installed correctly, you will

no longer see any part of the gold edge. If your

modem still does not work, you may need to remove it

and reinstall it in another available PCI slot. Shut

down and restart your PC. Check your modem again

using Control Panel as described previously.

If you have Windows 2000

Click Windows

StartStart

Start,

SettingsSettings

Settings, and then

Control PanelControl Panel

Control Panel.

Double-click the

Phone and Modem Options Phone and Modem Options

Phone and Modem Options icon.

Click the

ModemsModems

Modems tab. Make sure that the correct

modem is highlighted, U.S. Robotics V.92 Fax Win Int. If

you do not see a description of your modem, see the

Note after this section. If you do see the description,

click the

PropertiesProperties

Properties button. Click the

DiagnosticsDiagnostics

Diagnostics tab.

Click the

Query ModemQuery Modem

Query Modem button. You should see a

series of commands and responses from the modem.

This means that the installation was a success. If you

do not see commands and responses, see the Note

after this section.

NOTE: If your modem is not listed and/or you do not

see a series of commands and responses, make sure

that your internal modem is physically installed

correctly in your computer. With the power off, press

the modem in firmly so that it is seated properly in its

slot. When the modem is installed correctly, you will

no longer see any part of the gold edge. If your

modem still does not work, you may need to remove it

and reinstall it in another available PCI slot. Shut

down and restart your PC. Check your modem again

using Control Panel as described previously.

Windows 95 Users

Turn on your computer. Insert your Installation CD-

ROM into your drive before Windows opens. When the

Add New Hardware Wizard appears, click

NextNext

Next. If the

Wizard is unable to locate the driver, click

OtherOther

Other

LocationsLocations

Locations. Click

BrowseBrowse

Browse and select your CD-ROM

drive. Select

DriversDrivers

Drivers and click

OKOK

OK. Click

OK OK

OK on the

Select Other Location window. Click

FinishFinish

Finish. At this

point you may get an Insert Disk notice. Click

OKOK

OK. The

Copying Files screen will open. Click

BrowseBrowse

Browse and

select your CD-ROM drive. Double-click

DriversDrivers

Drivers. Click

OKOK

OK. The Copying Files screen will appear again. Click

OK OK

OK to complete the installation. When asked to

restart your computer, click Yes .

Step 3

Verify that the modem is

properly installed.

If you have Windows XP

Click Windows

StartStart

Start, and click

Control PanelControl Panel

Control Panel. Click

Network and Internet ConnectionsNetwork and Internet Connections

Network and Internet Connections,

Phone andPhone and

Phone and

Modem OptionsModem Options

Modem Options, and then click the

ModemsModems

Modems tab. You

should see a description of your modem, U.S. Robotics

V.92 Fax Win Int, and a COM port setting. If you do not

see a description of your modem, see the Note after

this section. If you do see the description, click

ModemModem

Modem, highlight the description of your new modem,

and click

Properties Properties

Properties. Click the

DiagnosticsDiagnostics

Diagnostics tab. Click

the

Query ModemQuery Modem

Query Modem button. You should see a series of

commands and responses from the modem. This

means that the installation was a success. If you do

not see commands and responses, see the Note after

this section.