Technical information

Page 91
No. of Cores x Cross Section (n x mm
2
) Copper Content (Kg/Km) Total Weight (Kg/Km) Outer Diameter (approx. mm) Calorific Potential (KWh/m)
2 x 1.0 19 75 7.4 0.16
2 x 1.5 29 97 8.2 0.18
2 x 2.5 48 141 9.6 0.24
4 x 1.0 39 114 8.6 0.23
4 x 1.5 58 149 9.6 0.27
DÄTWYLER Lifeline cable is suitable for fire
alarms and emergency lighting where BS6387
and BS7629 standards are acceptable and meets
the installation and performance requirements of:
• BS5839 Pt.1 for use in fire alarms
• BS5266 for use with emergency lighting
• BS4066 ‘Tests on electrical cable under fire
conditions’
• IEC331 fire resistance
Lifeline is LPCB approved to BS6387 CAT CWZ
and BASEC approved to BS7629.
Lifeline is low smoke, zero halogen, has an
integral aluminium backed mylar tape screen with
tinned drain wire and requires no special
terminations, tools or ferrules for installation.
Full details of Lifeline cable can be found in the
DÄTWYLER Lifeline datasheets on the Tyco Safety
Products website (www.tycosafetyproducts -
europe.com).
DÄTWYLER offer a wide range of cable and safety
cabling systems including complete safety cable
systems to DIN4102 part 12. All DÄTWYLER
products are available at preferential prices to
Tyco companies via Tyco Safety Products. For
more information contact Rob Sutcliffe
([e-mail]).
The following DÄTWYLER Lifeline cables are held
in stock at Tyco Safety Products, Letchworth
warehouse, together with suitable P clips and
glands. Cables are priced per metre but must be
ordered in units of 100 metre. P clips and glands
are priced each but must be ordered in packs.
Fire Resistant Cable
Product Codes Description - DÄTWYLER Lifeline cable
No. Cores Core Size Colour Clips
599.048.020 2 + earth 1 mm Red P34 R
599.048.022 2 + earth 1.5 mm Red P34 R
599.048.023 2 + earth 1.5 mm White P34 W
599.048.024 2 + earth 2.5 mm Red P37 R
599.048.032 4 + earth 1 mm Red P37 R
599.048.034 4 + earth 1.5 mm Red P40 R
599.048.035 4 + earth 1.5 mm White P40 W
Product Codes Description - DÄTWYLER Lifeline Fire Resistant P Clips & Glands
Qty. per pack Reference Colour
599.048.001 50 P34 Red
599.048.002 50 P34 White
599.048.003 50 P37 Red
599.048.005 50 P40 Red
599.048.006 50 P40 White
599.048.007 50 P43 Red
599.048.009 10 NG1 Red
599.048.010 10 NG1 White
Technical Specification
Construction
Conductor: Bare copper, solid or
stranded to BS 6360
Insulation: Special double layer
insulation according to
BS 7655, E15
Inner Covering: High temperature resistant
glass fibre tape
Screening: Al-Laminated tape with
tinned copper drain wire,
solid to BS 6360
Outer Sheath: Flame retardant polyolefin
compound according to
BS 7655, LTS3
Technical Properties
Rated Voltage: 300/500V
Test Voltage: 2000V, 50Hz core/core
2000V, 50Hz core/screen
Operating Temp: -15
o
C to +90
o
C
Core Colours:
• 2 cores + earth: red, black
• 4 cores + earth:red,yellow,blue,black
Sheath Colour: Red or white
General Properties
• Zero Halogen, no corrosive gases -
IEC 60754-2, BS 6425 part 1
• Reduced fire propagation - IEC 60332-
3, BS 4066 part 3
• Minimum smoke emission - IEC 61034,
BS 7622
• Insulation integrity - IEC 60331
(FE180), BS 6387 (cat. CWZ)
Approvals
• BASEC