Technical information

Page 90
Auxiliary Interface Relays
Boxed Relays
567.005.004
Relay 5010. Supplied with 1 PCB but can fit a
maximum of 2 PCB’s each containing up to 5
plug in relays. Order relay (569.001.007 )
separately.
568.001.006
Relay 5016 PCB (8 Relays) - Rated at 1 amp @
30Vdc resistive.
567.001.004
Relay 5000 One or two plug in relays on PCB.
Order relay (569.001.007) separately.
567.007.008
Alarm Relay 240Va.c. MK4
567.007.009
Alarm Relay 24Vd.c. MK4
568.001.007
Relay 5000 Housing auxiliary relay (small)
Spare Relay Housings
Product Code
569.001.007
Cradle relay and retaining clip 2 C/O 26V nominal
700K ohm coil 5 amp (used with Relay 5000 and
5010).
Cradle Relay and Retaining Clip
568.001.008
Relay 5010 Housing auxiliary relay (large)
Product Code
584.002.001
Sprinkler delay module. Provides
preset delay between sprinkler
pressure switch and conventional
fire detection panel.
Sprinkler Delay Module
Miscellaneous Fire Products and Spares
These frames are used mainly for Fire Alarm Zone
Charts and are available to fit A4 to A1 size
drawings. These come supplied with fitting hooks.
Product Codes
525.001.005
A4 Dimensions: 212mm x 297mm
525.001.006
A3 Dimensions: 280mm x 356mm
525.001.007
A1 Dimensions: 483mm x 783mm
525.001.008
A2 Dimensions: 483mm x 367mm
Fire Notice Frames
567.005.005
Relay 5016. Supplied with 1 PCB but can fit a
maximum of 2 PCB’s each containing up to 8 DIL
relays. (Rated at 1 amp @ 30Vdc resistive)
The Zonal Sounder Circuit Monitoring PCB provides relay inputs (5 off) to
interface to 5 separate, and monitored sounder circuits. Each has a
maximum of 2 Amps.
Product Code
541.001.018
Zonal sounder circuit monitoring PCB
Zonal Sounder Circuit Monitoring PCB