Technical information

Page 85
The standard Besson Wafer sounder is supplied
in white with a blank cover included. The
specification is as follows:
Input voltage: 24V d.c. (+/-25%)
Sound Output: 60dBA/90dBA at 1m typical (pot.
Adjustable) offering the same sound formats as
the Banshee sounder range. It can therefore be
used in conjunction with the Banshee sounders
on the same site.
Technical Specification
Current: 4mA to 15mA
Temperature Range: -40°C to + 70°C
Dimensions: Dia 103mm, Height 22mm
(excluding coverplate)
Product Code
576.501.038
Besson wafer sounder and blank cover in white
The LPBB521 Line powered Addressable
Sounder is designed to be driven from a Loop
Powered MINERVA Analogue Addressable
controller via the addressable loop. The sounder
is low frequency [800-950hz]. The Sounder
output is set to Fast Sweep, but may be pulsed
under the control of the MINERVA.
An ultra low profile alarm sounder for fire and
security applications utilising all of the best
features of the traditional Banshee plus an
additional volume control fitted as standard. The
low profile unit has been designed to
complement new building interiors and is
available in red or white.
Features
• Ultra Low Profile
• Volume Control
• Side and Rear cable entry
• Optional Deep base
• Loop in out terminals
Sound Options:
Buzz: Very fast sweep at approx 120Hz
Fast Sweep: 800Hz-950Hz, sweeping 9 /Sec
Slow sweep: 800Hz-950Hz, sweeping 3/Sec
Continuous: 850Hz
Banshee/Bedlam
Meeting the requirements for BS5839 part 1, the
Bedroom Sounder range is well suited to hotels
and residential environments where aesthetics is
a prime concern. Matching the sound output of
the Banshee range of sounders so therefore they
can be mixed on a site.
Features
• Low current consumption 7mA
• Dual sound options selected via a jumper
switch: ‘Continuous’ and ‘Fast Sweep’ 90dB
• Can be both Flush and Surface mounted
• Robust terminal connectors to accommodate
up to 2.5mm
2
conductors
Product Codes
576.501.032.A
Flush Mount Sounder ADT Branded
576.501.032.T
Flush Mount Sounder Thorn Branded
Flush Mount Bedroom Sounder
Product Code Branded Colour Power Freq dB Alarm Current Weatherproof
576.501.004.A ADT Red 24V 800-950Hz 107 15mA No IP44
576.501.008.A ADT Red 24V 2.5-3KHz 105 25mA No IP44
576.501.033.A ADT White 24V 800-950Hz 107 15mA No IP44
576.501.024.A ADT Red 24V 800-950Hz 107 15mA Yes IP66
576.501.015.A ADT Red 24V 2.5-3KHz 117 30mA Yes IP66
576.501.004.T Thorn Red 24V 800-950Hz 107 15mA No IP44
576.501.008.T Thorn Red 24V 2.5-3KHz 105 25mA No IP44
576.501.033.T Thorn White 24V 800-950Hz 107 15mA No IP44
576.501.024.T Thorn Red 24V 800-950Hz 107 15mA Yes IP66
576.501.015.T Thorn Red 24V 2.5-3KHz 117 30mA Yes IP66
Sound levels are quoted on E-SPL Effective Sound Pressure Level @1 Metre which is the output in a
typical room setting. 117dB models are known as Bedlam sounders
The combined mounting bracket for the Besson
Banshee and Xenon Beacon allows quick and
neat installation of combined sounders and
beacons. The bracket allows the following
electronic sounders to be mounted with the range
of 1W Xenon Beacons:
• Besson Banshee
• Besson Bedlam
• Loop powered MINERVA Besson Banshee
• MINERVA FIRECRYER voice enhanced
sounder
The bracket can be used with any of the 24Vd.c
1W Xenon beacons in red, clear, amber or blue
(Part no.'s 540.001.030/031/032 & 033)
Product Codes
576.501.041
Banshee/Xenon bracket
576.501.042
Banshee IP66 backbox for use with loop powered
banshees and FIRECRYERS
577.001.006
Flush mounting bracket for use with low profile
banshees - white
576.501.011
Banshee/Bedlam weatherproof mains adaptor
pack 240Va.c. to 24Vd.c. use on any 24Vd.c.
Banshee or Bedlam
Accessories
Line Powered Banshee
Besson Wafer Sounder
Banshee
Weatherproof Banshee
Bedlam
Banshee/Xenon Bracket
Banshee Flush Mount Bracket
Besson Wafer Sounder
Flush Mount Sounder
Electronic Sounders
Product Code Branded Colour Power Freq dB Alarm Current Weatherproof
577.001.026.A ADT Red Loop LF 96 17mA No IP44
577.001.029.A ADT White Loop LF 96 17mA No IP44
577.001.026.T Thorn Red Loop LF 96 17mA No IP44
577.001.029.T Thorn White Loop LF 96 17mA No IP44
577.001.026.Y Tyco Red Loop LF 96 17mA No IP44
577.001.029.Y Tyco White Loop LF 96 17mA No IP44