Technical information

Page 80
Fulleon Range of Sounders
The 24 Vdc Symphoni Sounder is a general
purpose internal sounder, available either as a
very high output sounder for noisy areas, or a
high output low current sounder for applications
where power is limited. Both versions share the
same horn and backbox which has double cable
entries for ease of installation.
The low power version has 3 selectable tones
which may be employed for one, two or three
stage alarm applications. The high output version
has 32 selectable tones and retains full tone
compatibility with the Roshni, Squashni and
Askari product ranges.
Product Codes
576.501.200
SY/R Low Power Red Symphoni Sounder
(3 tone)
576.501.201
SY/W Low Power White Symphoni Sounder
(3 tone)
576.501.202
SYHO/R High Output Red Symphoni Sounder
(32 tone)
576.501.203
SYHO/W High Output White Symphoni Sounder
(32 tone)
MXCE 2 Wire Symphoni Sounder
A Symphoni electronic sounder designed
specifically for installation on the detection zone
of the MXCE panel.
Technical Specification
Sound Output @ 1M: 100dB(A) +/-2dB(A) @ 24Vdc
Tones:
Continuous - 970Hz
Alternating - 970/800 Hz at 2 Hz
Pulsed - 970 Hz at 1Hz
Operating Temperature: -25 to +70 C
Construction: Red/White ABS
Ingress Protection: IP42
Termination: 2.5mm
2
Screw Terminals
Product Codes
576.501.204
Symphoni 2 Wire Sounder (Red)
576.501.205
Symphoni 2 Wire Sounder (White)
Fulleon 24Vdc Symphoni Sounder
Model Symphoni High Output Symphoni (Low Power)
Operation 2 Hours Continuous Continuous
Operating Voltage Range 9-28Vd.c. 12-30Vd.c.
Sound Output @ 1m Up to 120dB(A) 100dB(A) +/- 2dB(A) @24Vd. c.
Volume Control Down to 80dB approx.
Current Consumption 240mA +/- 20mA on Tone 3 5mA +/- 1mA at all volumes
Tones 1 to 32 (see table under Flashni section) Alternating 990Hz/650Hz@2Hz
Continuous 990Hz
Intermittent 990Hz, On/Off@1Hz
Synchronisation Synchronised Start Synchronised Start
Frequency Stability +/- 0.15% +/- 0.5%
Operating Temperature -25 °C to +55°C -25°C to +70°C
Line Monitoring Method Polarised Input Polarised Input
Construction ABS Plastic Case ABS Plastic Case
Ingress Protection IP42 IP42
Weight 0.58Kg 0.212Kg
Technical Specification