Technical information

Page 78
STOPPER II is constructed as the STOPPER from
tough injection moulded polycarbonate.
Physically larger than the STOPPER the
STOPPER II extends the number of products to
which these tough multi-purpose covers can
protect.
It consists of a strong tamper-proof clear
polycarbonate cover and frame that fits easily
over such products as break glass callpoints. The
STOPPER II can also be fitted with an integral
battery powered sounder which activates if the
cover is lifted.
The STOPPER II is suitable for callpoints up to
160mm square like the DIN820/830 and CP830.
Product Code
515.001.034
STI1230 Surface fit STOPPER II
STOPPER II
The Weather STOPPER and Weather STOPPERII
extends the life of weather exposed devices, such
as break glass callpoints, by offering protection
against harsh conditions and environments.
Experience has shown that this protective cover
can extend the life of products installed in saline
atmospheres, such as oil rigs and ship decks.
While offering environmental protection the
Weather STOPPER and Weather STOPPER IIare
constructed from tough durable polycarbonate
which will also guard against tampering,
vandalism or accidental operation of devices such
as emergency switches.
Product Codes
515.001.036
STI6535 Surface fit Weather STOPPER
515.001.035
STI3150 Surface fit Weather STOPPERII
Weather STOPPER & Weather STOPPER II
The Smoke Beam/CCTV Guard is manufactured
from tough coated steel rod and is designed to
protect projected beam detectors or CCTV
cameras from vandalism or accidental damage.
Suitable for use with System Sensor, Hochiki and
Fireray 2000 detectors.
Technical Specification
Dimensions: 260H x 200W x 321D mm
Product Code
516.015.009
STI9625 Smoke beam/CCTV guard
Smoke Beam/CCTV Guard
The Extinguisher STOPPER is a self powered
electronic security device which can be installed
and protecting fire extinguishers in minutes. The
Extinguisher STOPPER is an effective way to stop
vandalism, misuse or theft. This simple self
contained device incorporates a unique and
patented steel cable operated switch mechanism,
which activates a piercing alarm when the
extinguisher is removed from its normal position.
One end of the operating cable is crimped and
secured around the neck of the extinguisher and
inserted into the alarm unit. If the operating cable
is detached from the unit a 10dB sounder is
activated.
Product Codes
515.001.038
STI6200 Extinguisher STOPPER
515.001.039
CO23 Spare key for extinguisher stopper
Extinguisher STOPPER
STI6535
STI3150
The Exit STOPPER is a completely self contained
and self powered security device to protect and
deter the unauthorised use of emergency exit
doors. It is a versatile, reliable and extremely easy
to install electronic door alarm. If the door is
opened the Exit STOPPER activates a 110dB
electronic sounder. A key operated over-ride
facility is incorporated into the front of the unit,
which will allow authorised use of the emergency
door.
The Exit STOPPER is injection moulded in flame
retardant polycarbonate and can be easily
installed on wooden, glass or metal doors. There
are also options for remote and double door
installation.
The unit comes complete with low battery
warning, automatic reset facility, a choice of
steady pulsating tones, a 9V long life alkaline
battery and installation pack.
Product Code
515.001.037
STI6400 Red Exit STOPPER
Exit STOPPER