Technical information

Page 68
Safety Enclosures
UC Series Enclosures
The UC series of enclosures provides a simple
but effective means of mounting and protecting
the MTL3000 series units, in safe areas. A
standard lightweight enclosure with transparent
lid, which can accommodate 4 units. The
polycarbonate enclosures are impact resistant,
flame retardant, and dustproof to IP65.
ProductCode
517.001.196
UC2 4, Way Barrier housing
The MT series of enclosures provides a simple,
effective means of mounting and protecting
MTL700 Series barriers in safe areas or low-risk
hazardous areas. Three lightweight polycarbonate
enclosures with see through lids accommodate
up to 2, 5 and 12 barriers in the safe area. All the
enclosures are supplied ready fitted with a nickel
plated brass busbar mount, so barriers can be
installed and wired up immediately without
special tools.
Product Codes
517.001.198
MT2 2,Way Zener Barrier Housing.
517.001.199
MT5 5,Way Zener Barrier Housing.
517.001.200
MT12 12,Way Zener Barrier Housing
MT Series Enclosures
The ERL7 earth rail is a nickel plated 3 x 10mm
rail (1 metre long), suitable for a do-it-your self
mounting arrangement. It will accommodate up to
2.5 ETM7 earth terminals per barrier location for
terminating earth returns and cable screens from
the hazardous area.
The IMB7 mounts on a flat surface or top hat rail
(35mm) or G-profile rail and acts as a convenient
method for mounting the earth busbar.
Product Codes
517.001.205
ERL7 Earth rail I.S. systems
517.001.206
ETM7 Earth termination connection system
517.001.207
IMB7 Insulating mounting block
517.001.120
System 601 EOL Unit (PK10)
Ancillaries
DX Series Enclosures
The MTL ‘DX’ Series enclosure equipment is
designed to house MTL 5000 isolating interfaces
and MTL 7000 series shunt diode safety barriers.
Enclosures are usually selected on the number of
units they will accommodate. The following table
shows the capacity of each of the enclosure
types.
ProductCodes
517.001.248
DX070 Enclosure MTL 5000/7000 series barriers
517.001.247
DX170 Enclosure for MTL5000/7000 series
barriers
Enclosure MTL5000 Isolators 16mm Pitch MTL7000 Barriers 7.5mm Pitch
DX070 4 (2*) 9 (5*)
DX170 10 (8*) 22 (18*)
* Use these figures when two IMB57 mounting brackets for tagging/earth rail accessories are included