Technical information

Page 65
The and H900 range of fixed temperature heat
detectors are designed to operate at 60
o
C and
90
o
C respectively. They are particularly suited to
areas where rapid changes in temperature and/or
high ambient temperature exist, together with
unsuitable environmental conditions for smoke
detectors. This makes the detectors ideally suited
for galleys, laundries etc.
Features
• Approved by Marine classification authorities
• Two wire supervised circuit
• Draws no quiescent current
• Self re-setting
• Special versions can be used in any Zone 1 or
Zone 2 environment
• Grade 3 to European Standard EN54 Part 5
1977
Technical Specification
Operating Voltage: up to 24V d.c.
Quiescent Current: zero
Alarm Current: Limited by internal 390 ohm
or 50 ohm resistor
Dimensions: 82mm dia x 41mm
Weight: 73gm
Material: Cycolac ABS
Operating temp. range: -20
o
C to +100
o
C
Relative Humidity: up to 100% RH (Non
Condensing)
Alarm Temp: H6XX: 60
o
C
H9XX: 90
o
C
Product Codes
517.001.130
DHM8 (including 2 x 20mm glands)
516.014.017
H600 60
o
C Fixed temp. Grade 1
516.014.021
H601 60
o
C Fixed temp. Grade 1 (Remote LED
Ind.)
516.014.019
H602 60
o
C Fixed temp. Grade 1 (Integral LED
Ind.)
516.014.025
H604 60
o
C Fixed temp. Grade 1 (Integral LED
Ind.) Intrinsically Safe - Simple Apparatus
516.014.018
H900 90
o
C Fixed temp. Grade 1
516.014.020
H902 90
o
C Fixed temp. Grade 1 (Integral LED
Ind.)
516.014.026
H904 90
o
C Fixed temp. Grade 1 (Integral LED
Ind.) Intrinsically safe - Simple Apparatus
Datasheet - Product Code PSF108 “H Series Fixed
Temperature Detectors”
H Series Heat Detectors
The SM87BG/CP530 is based on the popular
MEDC SM87BG explosion proof EEx ‘d’ callpoint
break glass and is BASEEFA approved under the
Tyco brand name with an integral CP530
addressable callpoint module suitable for use on
all MINERVA 8,16E and 80 analogue addressable
systems.
Technical Specification
MEDC Reference: SM87BGLAD1R1L0NR
Material: LM25TF Marine Grade Alloy
Certification: EExd IIC T6
IP rating: IP67
BASEEFA No.: SM87 ADDRESSABLE
UNIT C (A) Ex85B1037
Weight: 2.7kg
Dimensions: 122H x 122W x 105D mm
Mounting Holes: 4 x 9mm diameter (105 x
105mm centres)
Entries: 1 x M20 ISO right hand side
plus 1 x M20 ISO left hand
side
Text: FIRE - BREAK GLASS
Finish: Red Epoxy Paint
Tag label: None fitted as standard
NOTE: Stainless steel option available, contact
Product Management Department, Sunbury for
more details.
Product Codes
514.001.055 (Vol08A-02-D34)
EExd MEDC SM87BG heavy duty alloy
breakglass with integral CP530 potted
addressable module
514.001.056
Spare glass and ‘O’ ring assembly for SM87BG
SM87BG/CP530 Explosion Proof Addressable Callpoint
This manual fire alarm call point is designed in
accordance with the latest draft European Call
Point Standad (EN54-11).
Weatherproof to IP66 and available certified
intrinsically safe, simple apparatus or uncertified,
the units are manufacured from glass reinforced
polyester (GRP) which provides a robust,
corrosion free construction and ensures effective
and reliable operation in harsh industrial and
offshore environments.
Units are supplied in self coloured GRP with a
‘Burning House’ duty label as standard.
Product Codes
514.001.059
Intrinsically Safe Callpoint (BG3I4NBN)
514.001.061
Simple Apparatus Callpoint (BG3W4NBN)
514.001.058
Weatherproof Callpoint (BG3W4LBN)
BG3 Weatherproof and Intrinsically Safe Conventional Callpoint
MODEL BG3I Simple Apparatus/BG3W
PROTECTION Explosion Protected EExia
(Intrinsically Safe) Dust-tight & Weatherproof
CENELEC EN50014, 020
BASEEFA EExia IIC T4
CERTIFICATION Cert No. BAS00ATEX1067X Not Applicable
Suitable for use in Zones 0,1, & 2
VOLTAGE Up to 28V (IS) Up to 250 V a.c.
CERTIFIED TEMPERATURE -55°C TO +55°C Not Applicable
INGRESS PROTECTION IP66 IP66
EUROPEAN STANDARD FOR CALLPOINTS EN54-11 EN54-11
TERMINALS 6 X 4.0mm
2
6 X 4.0mm
2
DC: 0 - 30V 3A resistive or inductive
30V - 50V 1A resistive or inductive
SWITCH RATINGS Not Applicable AC: 0 - 250V 3A resistive or inductive
CABLE ENTRIES 2 X M20 Top or Bottom 2 X M20 Top or Bottom
WEIGHT 0.5Kg 0.5Kg
MATERIAL UV resistant glass reinforced polyester UV resistant glass reinforced polyester
FINISH Natural Red GRP Natural Red GRP