Technical information

Page 55
Page 55
LaserPLUS Standard Modular Range - LaserPLUS Detectors
The detector assembly contains the laser
detection chamber, high efficiency aspirator,
monitored filter cartridge, control electronics, and
relay interface. The detector assembly can be
used as a “distributed” system, with the display,
programmer and VESDAnet socket modules
mounted in a remote location. Alternatively, the
detector assembly can be configured as a “self-
contained” system by replacing the detector’s
blank panels with the display and/or
programming modules.
Features
• Wide sensitivity range
• Laser-based light source
• 4 Configurable alarm levels
• Purpose built Aspirator
• 4 In-line Inlet pipes
• Flow sensor for each inlet pipe
• Wide range DC power
• Low-cost maintenance
• Dual stage filter
• Easy access to filter cartridge
• 7 Software configurable relays
• Recessed mounting
• Multiple exhausts
Technical Specification
Supply Voltage: 18 to 30Vd.c.
Current Consumption: (No display or programmer)
240mA quiescent plus 50mA
alarm (24Vd.c. & 3000 rpm)
Dimensions: 225H x 350W x 125D mm
Weight: 4.0Kg (including display and
programmer modules)
Operating Temp.: 0
o
C to + 39
o
C
Humidity: 0-95% RH, non condensing
Aspirating Smoke Detectors VESDA - Vision Systems
VESDA LaserPLUS
TM
, is a high sensitivity aspirating smoke detector. It provides both an early warning to facilitate intervention, and a suppression (Fire 2)
signal to initiate release at an appropriate level, eliminating the need for a separate detection system. The system is modular, displays and programmers can
be installed only where needed. Many VESDA products are also available from stock in German. German product codes are shown in brackets where they
exist.
Datasheet - Product Code PSF105 “VESDA LaserPLUS”
516.018.001 (561.036)
VLP-012 LaserPLUS Detector, programmer and
display
516.018.002 (561.037)
VLP-002 LaserPLUS Detector and display
516.018.003
VLP-000 LaserPLUS Detector
516.018.013 (561.038)
VLP-400 LaserPLUS Detector with fire OK LED
VESDA LaserCOMPACT
TM
The LaserCOMPACT detector has been
specifically designed to provide all the benefits of
aspirating smoke detection, including very early
warning, in single small areas and where space is
a premium. This has been achieved through the
combination of approved LaserPLUS detection
technology, dual stage filtration technology and a
modified aspirator design incorporated in a
smaller enclosure with simplified display.
LaserCOMPACT is available in two versions, one
that interfaces via relays only (RO) or across
either the relays or VESDAnet
TM
(VN).
Features
• Reduced size
• Absolute smoke detection
• Wide sensitivity range
• Single pipe inlet
• Simple display
• Referencing
• VESDAnet communication (VN)
• Dual stage dust filter
• Three alarm levels
• Configurable relays
• Air flow monitoring
• Optional remote display and relay capability
• Simple mounting design
• AutoLearn
TM
Technical Specification
Supply Voltage: 18 to 30Vd.c.
Current Consumption: 225mA quiescent,
245mA in alarm
Dimensions: 225H x 225W x 85Dmm
Weight: 1.9Kg
Operating Temp.: -10
o
C to+ 39
o
C
Sampled Air: -20
o
C to +60
o
C
Product Codes
516.018.010 (561.043)
VLC-505 VESDAnet Version (VN)
516.018.011 (561.042)
VLC-500 Relays Only Version (RO)