Technical information

Page 48
Standard Detector Bases
The 4 inch base is designed to fit directly to the
ceiling or various common backboxes. This base
allows a detector to be fitted indirectly or a
functional base to be plugged in between the
base and detector.
Features
• Variety of fixing options
• Remote LED connections
• Available with continuity diode fitted
• Anti-tamper facility
• LPCB, Vds, Marine approved (M600/900)
• UL approved (4B)
Product Codes
517.050.001
M600/900 4” Universal mounting base for LPCB,
Vds approved detectors
571.070 - (K07226456)
M600/900 4” Universal mounting base for LPCB,
Vds approved detectors - Zettler Branded
515467
4B - 4” Universal mounting base for UL Approved
Detectors - Grinnell Branded.
517.050.601
4B - 4” Universal mounting base for UL Approved
Detectors - Thorn Branded.
Datasheet - Product Code PSF101 M600/900 Low
Profile Detector Bases
Manual - Vol01B-03-D2 “Detectors Fire Manual”
M600/900 and 4B - 4 Inch Universal Base
6” Universal Base
The 6” base is specially designed for applications
using the US style single gang backbox. The 6”
base provides an alternative to the 4” base in
most applications and is particularly useful where
large holes in the ceiling need covering or where
ceilings suffer from condensation.
Features
• Variety of fixing options
• Sealed back and cable entry
• Remote LED connections
• Anti-tamper facility
• UL approved (6B)
Product Codes
515468
6B Lo Pro detector base (6”) Grinnell branded.
517.050.606
6B Lo Pro detector base (6”) Thorn Security
branded. Suitable for use with LPC and Vds
approved detectors
The Standard Universal detector bases are compatible with both conventional (M600) and analogue (M900) addressable detectors. The bases have no
electronics and even when the detectors are connected to the bases, they can be electrically disconnected and left in a “park” position. This enables wiring
integrity tests to take place without any damage to electronics. When used with addressable detectors, the smart card access key automatically transfers to
the base, thus the address remains with the base even if the detector is changed or replaced. An optional, tool removable locking pin allows the detector to
be fixed in place to prevent tampering.
M600D Continuity Base
The M600D Continuity base is a standard 4 inch
base fitted with a continuity diode, for use with all
M600 Series detectors. The Base is designed to
ensure that the conventional system meets the
requirements of BS5839 Pt:1 for call-points
placed after detectors. The M600D works with XL,
NT, System 1700, MINERVA 1 to 4, MINERVA
MDM520 Module.
Product Codes
517.050.007
M600D Diode continuity mounting base.
509.018.006
Active End of Line Unit for use with M600
conventional detectors (not required on NT and
XL panels which are supplied with special EOL
devices)
Datasheet - Product Code PSF84 “M600/900 Low
Profile Fire Detector Range”
Manual - Vol01B-03-D2 “Detectors Fire Manual”