Technical information

Page 36
The range of T1000 panels are state-of-the-art
intelligent fire panels, which provide many of the
features normally only found on more expensive
analogue addressable panels. The panels are
supplied in 8 and 16 zone versions. Each
detection zone can support up to 32 conventional
detectors. The user interface is provided through
a combination of LEDs and a 2 x 40 character
LCD display. The LCD display provides a full
customer definable text display of the alarm or
fault condition whilst also displaying zones in
alarm, fault or isolate status. The display also
indicates the outputs that have been activated.
Features
• Developed for Vessels with less than 300
Detectors
• Approved by all Major Marine Authorities
• Customer friendly, multi language information
on LCD display
• Comprehensive fault diagnostics
• 8 and 16 zone Panels
• Can be used with a wide range of Minerva
Marine approved Detectors
• 4 monitored Sounder outputs up to 4A
• 4 monitored Relay outputs
• 3 programmable auxiliary inputs
• 3 levels of alarm discriminations per zone
• One common fault relay
• Programmable cause and effect
• Can interface to intrinsically safe System 601
• Manned/ unmanned mode
Technical Specification
Dimensions: 320H x 430W x 150D mm
Weight: 6.3kg
Power Supply: 198 -264Va.c.
Quiescent Current: 50mA @ 24Vd.c.
Alarm Current: 1Amp @ 24Vd.c.
Operating Temp: 0 to +40°C
Operating Humidity: 0-90% RH non-condensing
Datasheet - Product Code PSF96 “T1000
Intelligent Control Panels”
Optional Product Codes
The following product codes include all the
optional extras which can be included as part of
your customer's requirements. Additional spare
parts are also included.
509.022.001
NT100 Series Spare Commissioning Kit Included
With All Panels
509.022.003
NT100 4 Way Expansion Board - Support NTX-
02,03,04 Expansion Boards
509.022.004
NT100 16 Way Relay Output Board (24Vd.c.@1A)
Requires NTX-01 Expansion Board
509.022.005
NT100 16 Way Digital Output Driver Board -
Requires NTX-01 Expansion Board
509.022.010
Spare PSU For T1000
509.022.013
NT Flush Mount Bezel
509.022.015
T1000 Display PCB Spare
509.022.016
T1000 CPU board V1.6 spare
509.022.024
T1000R CPU board V1.6R spare
Product Codes
508.022.035
T1008 8 zone marine NT conventional fire
Controller
508.022.036
T1016 16 zone marine NT conventional fire
Controller
508.022.037
T1016R repeater for use with T1008 & T1016
T1000 Marine Fire Controller
Conventional Marine Panels
The T882 control unit is intended for marine use
throughout the world. The T882 has two sounder
circuits. In the event of an alarm the primary bell
circuit will operate the sounders in selected areas.
If the alarm is not accepted ("Silenced") within
three minutes, the secondary circuit will operate
all the other sounders in the system. Any manual
Alarm callpoint will override the sounder delay. A
manual Alert callpoint will not override the delay
of the secondary circuit. The T882 can be
powered using one of three options:
1/ with internal power unit
The ship's 110/240V a.c. supply is the primary
supply, switching to a monitored ship's 24V d.c.
supply in the event of primary supply failure.
2/ with internal power unit
The ship's 110/240V a.c. supply is the primary
s u p p l y, switching to an internal monitored and
charged 24V d.c.-battery supply (Four off, 6V 10Ah
lead acids) in the event of primary supply failure.
3/ without internal power unit
The ship's 24V d.c. supply is the only supply
connected.
Features
• Approved by a variety of marine authorities
• Up to 4 fire detection zones
• Two alarm levels per detection zone (except
I.S. zones)
• Two monitored bell circuits selectable as con-
tinuous or intermittent
• Secondary alarm output delay (up to 3 mins)
• Integral power changeover or battery charger
option
• Panel test mode
• Faults can be set to either latching or non-
latching
• Can interface to intrinsically safe System 601
• Lamp dim feature
• Replaceable legend
Other Input/Output facilities (rated 1A at
30Vd.c. resistive):-
• Two monitored sounder circuits rated at
24Vd.c. 1A each.
• One silenceable and one non-silenceable
Common Alarm contact
• One latching/non-latching fault contact
• Four zonal alarm auxiliary contacts
• Repeater outputs switched to common
• One fused 24Vd.c. 1A output
• One external fault monitoring input
Technical Specification
Operating temp.: -25°C to +55°C
Storage temp.: -25°C to +70°C
Humidity: 95% RH non-condensing
The T882 control panel is fitted directly to the
bulkhead. Housing is zinc plated 1.6mm thick
mild steel.
Product Codes
508.013.030
T882 Control Panel c/w Power Unit
508.013.031
T882 Control Panel 24Vd.c. only
509.013.064
T882 PCB Terminal Field
509.013.068
T882 Power Supply Unit
400.007.002 (Available from Thorn Marine)
T882 Handbook
560.001.013
Battery 6V 10Ah
509.013.081
Long voyage spares kit
509.013.080
Short voyage spares kit
Manual - UHM2 “Marine Fire Manual”
T882 Four Zone Marine Fire Controller
Size With Power Without Power
Unit Unit
Height 267mm 267mm
Width 398mm 398mm
Depth 187mm 102mm
Weight: 10Kg 8.5Kg