Technical information

Page 28
General Wiring Diagram
The range of NT100 panels are state-of-the-art
intelligent fire panels, which provide many of the
features normally only found on more expensive
analogue addressable panels. The range of
control panels are LPCB approved to EN54Pt. 2
and 4 and include many local approval authorities
around the world. The panels are supplied in 8
and 16 zone versions. Each detection zone can
support up to 32 conventional detectors. The user
interface is provided through a combination of
LEDs and a 2 x 40 character LCD display. The
LCD display provides a full customer definable
text display of the alarm or fault condition whilst
also displaying zones in alarm, fault or isolate
status. The display also indicates the outputs that
have been activated. Each control panel can have
up to a maximum of 3 repeaters.
Features
• LPCB & ANPI (BOSEC) approved to EN54
Parts 2 and 4
• Customer friendly, multi language information
on LCD display
• Comprehensive fault diagnostics
• 8 and 16 zone Panels
• Can be used with a wide range of approved
detectors
• Detector removal monitoring
• 4 monitored Sounder outputs up to 4A
• 4 monitored Relay outputs
• 3 programmable auxiliary inputs
• 3 levels of alarm discriminations per zone
• One common fault relay
• Internal batteries (up to 12Ah)
• Programmable cause and effect
• Programmable user access levels
• Can interface to intrinsically safe System 601
• Manned/ unmanned mode
• Optional fireman's interface
• Optional printer
• Optional repeater units
• Optional I/O expansion board
• 16 digital outputs or 16 relay output options
Technical Specification
Dimensions 320H x 430W x150D mm
Weight 6.3kg
Power Supply 198 -264Va.c.
Quiescent Current 50mA @ 24Vd.c.
Alarm Current 1Amp @ 24Vd.c.
Operating Temp 0 to +40°C
Operating Humidity 0-90% RH non-condensing
Datasheet - Product Code PSF95 “NT Fire Control
Panels”
NT100 Conventional Controllers
Product Codes
The following product codes include all the
optional extras which can be included as part of
your customer's requirements. Additional spare
parts are also included.
509.022.001
NT100 Series Spare Commissioning Kit
Included With All Panels
509.022.008
PRN-02 Spare Printer Paper For PRN-01
(Supplied one per pack)
509.022.011
NT100 Spare PSU For NT,NTR & NTF Variants
509.022.013
NT Flush Mount Bezel
Ancillaries
509.022.035
NT/NTR/NTF CPU Board V1.9 Spare
509.022.033
NT/NTR/NTF Display PCB square
Standard Fire Control Panel Standard Fire Repeater Panel
Country NT108 NT116 NT116R
U.K. 508.022.008 508.022.016 508.022.038
Spain - 508.022.019 -
Belgium 508.022.009 508.022.017 508.022.044
Holland 508.022.010 508.022.018 -
Fire Panels with Integral Fireman’s Interface
Country NTF08 NTF16
Finland 508.022.011 508.022.029
Denmark 508.022.014 -
Holland 508.022.042 508.022.043
Up to 3 repeaters