Technical information

Page 23
The new CB200 range of conventional fire panels,
are low cost - high quality panels which provide
an excellent product solution to meet the differing
needs of today’s diversified marketplace.
The slimline CB200 is specifically intended for
use on simpler, low cost fire alarm installations
where it currently holds a dominant market
position.
The CB200 high quality - low cost conventional
panel range is housed in a compact aesthetically
appealing polycarbonate enclosure designed for
versatility hence allowing for surface or semi-flush
mounting.
Each panel in this series is”simple to install,
program and operate”, as reported by satisfied
installation engineers and critical end-users.
A comprehensive range of technically detailed,
support documentation relating to commissioning,
operating, maintenance and fault finding is easily
available if required.
Technical Information
The CB 200 conventional fire panel may be
supplied in 1 or 2 zone format. All zones and
alarm circuits are monitored for open and short
circuit fault conditions with detector removal
facility provided as standard. The cabinet will
house 2 x 12V 2.1 Ah S.L.A batteries wired in
series.
Comprehensive user controls, including the ability
to isolate each zone, assist in the prevention of
unwanted alarms during periods of building
maintenance or refurbishment. A slide-in insert is
included for clear zone identification.
The electronics motherboard has been designed
using the latest technology, thus providing
maximum reliability in a compact format.
The cabinet back-box houses only the
transformer, thus providing a virtually empty
enclosure for first fix installation. A steel gland
plate, removable plastic grommets and ample
space are designed to assist with cable
termination. The surface-mount electronics
motherboard is fitted and terminated after the first
fix installation and finally a terminal cover
completes the panel installation.
Panels are boxed complete with a three-sticker set
allowing user selection and application on site.
CB200 Panel Enhancements
The CB200 panel may be enhanced to provide
additional facilities.
The C1437 alarm module provides the facility to
split and control one alarm input into four
independent, fully monitored alarm output circuits.
The C1437 has open & short circuit fault
monitoring on all alarm circuits (complete with
LED indication). Connection between the panel
and the C1437 board is monitored for open and
short circuit faults.
Note
If panel enhancements are required, the
enhancement boards must be ordered complete
with suitable enhancement enclosure and panel.
Enhancement boards and enclosures cannot be
ordered as individual component items.
Features
• Built-in detector removal indication facility
• Available in 1 or 2 zone format
• One-man test facility
• Removable cable entry grommets
• Compact and stylish design
• Surface or Semi-Flush Mounting
• User friendly controls
• Ample termination space
• Poly carbonate enclosure
• Supplied with log book/manual
• Complies with EMC and LVD Directives
Panel Dimensions
Height: 245 mm
Width: 313 mm
Depth: 92 mm
Product Codes
2500/021 CB200 1 zone conventional control
panel, CE Marked, space for 2Ah battery set
(2 x 12V)
2500/022 CB200 2 zone conventional control
panel, CE Marked, space for 2 Ah battery set (2 x
12V)
Panel Enhancement Boards
2500/032 C1437 4 way alarm extender board.
2500/034 C1466 1 x double pole relay board (1A
contacts - PCB only)
Enhancement Enclosures
2500/220 Enclosure c/w 1A PSU & space for 4 x
C1437 and 2 x C1466 & 6.2AH battery set.
Cabinet size - 380H x 600W x 210D mm.
2500/221 Enclosure c/w 3A PSU & space for 2 x
C1324 or 4 x C1437 boards. Cabinet size - 380H x
600W x 210D mm.
2500/222 Enclosure c/w 5A PSU & space for 2 x
C1324 or 4 x C1437 boards. Cabinet size - 380H x
600W x 210D mm.
CB200 (Conventional Control Panel)
Conventional Fire Alarm Panels - BS5839 and EN54