Technical information

Page 16
Product Codes
9976130
TFX 40X2 Indicator with MPIM board. Provides an
additional 40X2 zone indicators for use with TFX-
500M or TFX-800M
9976132
TFX 40 Way status control module and MPIM
module for adding to TFX-500M or TFX-800M
9976134
TFX 16 Way status control module with MPIM for
use with TFX-500M or TFX-800M
9976136
TFX 80 Indicator module with one integral MPIM
card for use on TFX-800M
9976137
TFX 80 Way Indicator module with 2 MPIM
modules built in
TFX Additional User Interface Module
The Remote Operator Control Panel (remote OCP)
is designed for use with the AUTOCALL TFX
series systems to provide system operating
controls at a remote location. The unit is suitable
for mounting in lobbies, vestibules or anywhere
were space is a premium. Three configurations
are available and each are housed in small,
attractive units, finished in red with a black
faceplate. Each configuration is suitable for indoor
semiflush or indoor surface mounting.
All remote OCP configurations contain a fire
control module (FCM) to duplicate basic fire alarm
functions at a remote location. Control buttons
with LEDs for panel silence, alarm silence, system
reset, and drill are furnished. Labels for each
control button may be field customised in
languages other than English, or to meet on site
requirements. A lamp test button is also provided.
LEDs for fire alarm, supervisory, fault and isolate
annunciation are furnished. A separate LED for
power on indication is also provided. In addition,
three programmable LEDs are available for
annunciation of programmed actions.
The Remote OCP is also available with either an
operator display module (ODM) or a 16 indicator
module.
The optional ODM provides an 80 character,
backlit alpha-numeric, LCD operator display. The
LCD provides user defined text messages of event
type and precise location. An operator’s keypad
allows the user to acknowledge events, make
inquiries, and view system status. The real time
clock and date settings are set and changed from
the keypad as well. All control functions are
password protected.
Functions available at the ODM include:
. Per point annunciation of alarm and trouble
events
. View and acknowledge events which have not
been restored to normal
. Force outputs on
. View smoke detector analogue values in %
obscuration per foot, and perform sensitivity
checks, NFPA 72 requirements
. View event history log
. Isolate zones and points
. Enable Solo test mode
. Enable maintenance mode
. Print status and maintenance reports
. Change smoke detector sensitivity
The optional 16-indicator module provides field
configurable LEDs for annunciation by zone,
group, device type or point. Since LEDs are bi-
coloured (red and yellow), each LED may be
configured to annunciate alarm and trouble. Label
space is provided with each LED for custom
identification.
Features
. LEDs Fire alarm - red
Supervisory - yellow
Fault - yellow
Isolate - yellow
Power-on - green
. Enable key switch
. Panel silence button and LED - yellow
. Alarm Silence button and LED - yellow
. System reset button and LED - yellow
. Drill button and LED - red
. Three programmable LEDs - yellow
. Lamp Test
. Internal buzzer
Features - Optional Fire Control Module
. 7 Sockets which accept red, yellow or green
LEDs for special requirements
Features - Optional Operator Display Module
. Alphanumeric display
. Numeric touch pad
. No/Delete button
. Scroll up button
. Scroll down button
. Yes/Enter button
. Quit button
. Fast access button
Features - Optional 16-Indicator Module
. Zone alarm LEDs - red
. Zone trouble LEDs - yellow
Listings & Approvals
. UL File No. S374
. CSFM No. 7165-1493:147
7170-1493:167
. MEA 415-92-E, Vol. IX
. FM 3001053
Technical Specification
Operating Temp.: 0 to +50
o
C
Operating Humidity: 85% Non-Condensing
Current Draw:
Standby Current: 50mA (FCM)
32mA (ODM)
9mA (16-IM)
Alarm Current: 65mA (FCM)
32mA (ODM)
34mA (16-IM)
Product Codes
976402
TFX Remote operator control panel with fire
control module (FCM) and operator display
module (ODM).
976403
TFX Remote operator control panel with fire
control module and 16 indicator LED module
(FCM/16IND).
976404
TFX Semi flush backbox for use with all remote
operator control panels.
976416
TFX Surface mount backbox for use with any
remote operator control panel.
Remote Operator Control Panel
9976134
9976136/997137
9976130
9976132
Product Codes
850509
TFX500 & 800M Field wiring guide
940577
TFX/CONSYS Programming cable with DB9
female connector CONSYS software available on
document control. Contact Jonathan Gilbert -
Product Management, Sunbury or Nick Wright -
Technical Services, Walthamstow
976254
TFX Spare keys for use on TFX OCM and door
976262
TFX SIM Serial interface module provides isolation
to serial printers
TFX Panel Components & Spares